Gate Installation in San Francisco - Free On-Site Survey, Written Price

Trusted Gate Installation for San Francisco Homeowners

A new gate in San Francisco has to do two jobs at once. It has to hold up to the marine layer and the afternoon wind off the ocean, and it has to keep a busy household – kids, dogs, bicycles, groceries – moving without a fight. We install gates that manage both, and we’ve been doing it since 2009 as part of the Cedarwell family of independently owned and operated gate specialists. Every installation starts with a written price before any work begins, and every job is covered by the 365-Day Done Right Promise: if it isn’t right, we make it right, no argument and no fine print. Cody Beckman leads our San Francisco team. We answer the phone around the clock at (628) 227-2771. Call when the gate problem is keeping you up, or when you’re ready to plan a new one.

Call (628) 227-2771

Key Takeaways

• Written price before work starts – always included, never a surprise.
• Factory-trained on Ghost Controls, DoorKing, Elite, and Mighty Mule openers.
• Shoe covers and drop cloths on every visit, plus a cleanup photo before we leave.
• Installations are measured and scheduled, not same-day. We promise a free measure and a written price instead.
• 365-Day Done Right Promise on every gate installation in San Francisco.

Automatic Gate Installation

Automatic Gate Installation means fitting a gate with a motor, safety sensors, and the control board that lets it open from a remote, a keypad, or a phone. You’d want this when you’re tired of stepping out into the rain to swing a driveway gate open, or when you want deliveries left inside a closed gate rather than on the sidewalk. Latch & Post Gate Repair San Francisco handles the full job: post setting, gate hanging, operator mounting, wiring, safety edges, and programming the remotes. A basic single-swing automatic gate in San Francisco typically runs between $3,800 and $6,500 installed, depending on gate width and opener brand - see our Gate Installation pricing page for more detail. You’ll see the exact number in writing before we touch anything.

Operator Selection and Wiring

We match the opener to the gate’s weight and how often it cycles, not the other way around. A gate that cycles 40 times a day needs a different motor than one that opens twice. We pull the power run, mount the safety photo eyes, and test the force settings so the gate stops if a child or dog is in the path.

Accessories and Entry Options

Keypads, phone app control, and exit loops all get wired and programmed the same day. We’ll show you how to add and remove codes before we leave. Everything gets tested at least ten full cycles before we call the job done.

Gate Installation Services

Gate Installation Services cover everything from a new pedestrian gate on a side yard to a full driveway gate system with automation. Homeowners call us when a wood gate has rotted past repair, when a rental property needs a secure entry, or when they’ve bought a house in the Richmond or Noe Valley hills where the old gate doesn’t close against the slope anymore. Our San Francisco crews handle permits where the city requires them, pour the concrete pads for posts, and hang the gate so it swings true. A standard residential gate installation in San Francisco usually lands between $2,200 and $5,000, depending on materials and whether automation is added. The number is fixed and written before work starts.

Materials and Hardware Choices

We work in welded steel, aluminum, and composite. In the Sunset and the Richmond District, salt-air corrosion is real, so we favor aluminum and stainless hardware there. Your floors stay clean either way: drop cloths go down before tools come out, and shoe covers go on at the door.

What a Full Installation Includes

Every installation quote includes the gate, hinges, latch or lock set, posts, and concrete. If we’re automating, you’ll also see the opener, safety sensors, and one remote listed as line items. The cleanup photo before departure shows exactly what we left behind – usually nothing but a working gate.

Electric Gate Installation

Electric Gate Installation is the wiring-and-motor half of an automatic gate: the part that brings power to the gate, mounts the operator, and makes the safety system work properly. You’d need this when you want an existing gate automated, or when an older system has been scrapped and you’re starting fresh with new controls. Latch & Post Gate Repair San Francisco is factory-trained on the brands families around here actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. An electric gate installation in San Francisco typically runs $2,800 to $5,200 for a single gate, including the operator and a standard power run. The price is written and agreed before any work begins.

Power and Conduit Runs

We trench conduit from the house or garage panel to the gate post, pull the low-voltage wire, and set the operator on vibration pads. Underground conduit depth follows San Francisco code, and we keep the trench narrow so your sidewalk or driveway edge doesn’t look like it was dug up. Before we leave, the trench is backfilled and tamped.

Safety Edge and Photo Eye Compliance

San Francisco requires entrapment protection on automated gates, and we take it seriously. We install photo eyes and contact safety edges on every electric gate, and we test them by hand with a two-by-four to simulate a child or pet. If the gate doesn’t reverse, it isn’t finished.

Driveway Gate Installation

Driveway Gate Installation is the full replacement or first-time build of a gate across a vehicle opening, usually with a custom width and a heavier hinge system than a walk gate. You’d want this when your driveway slopes, your gate sags against the grade, or you’re tired of hauling a heavy gate open by hand every morning. We handle the site measurement, post depth, gate weight calculation, and automation option if you want it. A driveway gate in San Francisco typically runs between $4,000 and $9,000 installed, including steel or aluminum gate fabrication, posts, hardware, and an opener if chosen. The written quote shows every line item, and that number is honored.

Sloped Driveways and Fitting

San Francisco driveways rarely sit flat. We cut gates to follow the grade so the bottom gap stays consistent, and we set posts deeper than standard where the soil is sandy or the slope is steep. In neighborhoods like Glen Park or Twin Peaks, that slope work is the difference between a gate that lasts ten years and one that sags in two.

Gate Weight and Cycle Testing

We weigh the gate panel before selecting hinges and an opener, because an underrated motor on a heavy gate fails early. Then we run it through full open-close cycles while we adjust the limits. By the time we leave, your driveway gate opens and closes the same way every single time.

Sliding Gate Installation

Sliding Gate Installation is the right choice for a driveway where space is tight against the house or a swing gate would block the sidewalk. The gate rolls on a track or cantilever rollers instead of swinging out, which means it works on a short apron and never hangs into the street. You’d choose sliding when your driveway is steep, short, or shares a boundary with a busy sidewalk. Latch & Post Gate Repair San Francisco installs both v-track and cantilever sliding gates. A sliding gate installation in San Francisco typically lands between $5,500 and $10,000, depending on track length, gate weight, and whether it’s automated. That number is written down before we start, and it doesn’t change.

Track Work and Leveling

The rail or track has to be dead level or the gate binds and burns out the motor. We use a laser level for the full run, then set the rollers at the right height for your gate’s weight class. In sandy soil near Ocean Beach, we add extra concrete support under the track.

Cantilever Versus Tracked Systems

Cantilever gates ride above the ground on a roller frame, so there’s no track to clog with leaves or gravel. Tracked gates are lower-profile and less expensive. We’ll show you both options with real numbers, and you decide which fits your driveway and your budget. Either way, the written price covers the whole install.

Gate Opener Installation

Gate Opener Installation is the job of mounting and programming the motor unit that automates a gate, whether it’s a retrofit onto an existing gate or part of a brand-new install. You’d need this when your old opener has failed, when you want keypad entry for a cleaner or dog walker, or when you’re automating a gate for the first time. We’re factory-trained on Ghost Controls, DoorKing, Elite, and Mighty Mule, among others, and we stock their OEM parts on the truck. A gate opener installation in San Francisco typically runs $1,500 to $3,800 when retrofitted to an existing gate, and more when a full power run and new safety system are required. The quote is written and agreed before the first screw comes out.

Retrofit Versus New Build

On a retrofit, we check the gate’s swing, weight, and hinge condition before we mount anything. A gate that binds at the hinges will kill a new opener in a year, so we address that first and tell you what we found. Sometimes that means adjusting the gate; sometimes it means the opener you wanted isn’t the right match. We’ll explain the choice and the cost, and you decide.

Programming and Handover

We program every remote, keypad code, and phone app while you’re standing there. You’ll open the gate yourself three times before we leave. If you lose a remote later, or a code stops working, the 365-Day Done Right Promise has you covered.

Gate Fabrication

Gate Fabrication is the building of a custom gate from raw steel, aluminum, or composite stock to fit a specific opening, grade, and style. You’d want fabrication when no off-the-shelf gate fits your San Francisco driveway, when you want a specific look to match a 1920s stucco facade, or when the opening is a non-standard width. Latch & Post Gate Repair San Francisco fabricates gates in our shop and finishes them for salt-air exposure in the outer neighborhoods. A custom fabricated gate in San Francisco typically runs $2,500 to $7,000 depending on material, size, and finish, before automation. The price is written before the first cut.

Design and Measurement

We measure with a laser at three points across your opening, because posted dimensions rarely match reality on a 100-year-old San Francisco property. Then we draw the gate to scale and walk you through the hinge placement and latch choice. You approve the design before steel is ordered.

Finish and Corrosion Protection

We powder-coat steel and anodize aluminum, and we use stainless hardware near the ocean. Salt air in the Sunset and Richmond eats standard zinc hinges in under a year. Every fabricated gate leaves the shop with drainage weep holes so water doesn’t collect inside the frame and rust it from within.

Brands We Service

Most gate openers on San Francisco properties come from a handful of manufacturers, and we’re factory-trained on every one of them. Ghost Controls makes a popular DIY-friendly opener that we install correctly and then stand behind with the same 365-Day Done Right Promise. We stock their OEM remote receivers and safety sensors on the truck.

DoorKing and Elite are the heavy hitters for driveway gates in the Bay Area: cast housings, strong motors, and decades of service life. We’ve installed and serviced both brands across San Francisco, Oakland, and San Mateo. Mighty Mule is the budget option we see a lot on side-yard gates, and we’ll tell you honestly when it’s the right call and when a stronger opener will save you money in year three. Whether you have a Ghost Controls, DoorKing, Elite, Mighty Mule, or any other make, we can help.

Signs You Need a Pro Right Now

• The gate scrapes the ground when it opens. Hinges or the post itself have shifted. The scraping will keep wearing the bottom of the gate, and a gate that drags puts triple load on the opener motor. We fix the alignment before the motor burns out.
• The opener hums but the gate doesn’t move. That’s usually the capacitor, a broken gear, or the clutch slipping. Running it anyway overheats the motor and turns a one-part repair into a full opener replacement.
• You can hear the gate from inside the house. A properly installed gate is quiet. Squealing or grinding means a bearing has failed or the track is out of level. The longer it runs dry, the more metal you lose.
• The gate reverses for no reason. Safety sensors are misaligned, the force setting is off, or something is in the beam path. An unpredictable gate is dangerous around kids and pets, and it’s the first sign of a failing control board.
• The post is leaning. A leaning post means the concrete footing has failed or the soil has shifted. Every week it leans a little more, and eventually the gate won’t latch at all. We reset or replace the post and re-pour the footing.

Our Process, Step by Step

1. 1
   You call, a live person answers. Day or night, you’ll talk to a human at (628) 227-2771, not a voicemail queue. We’ll ask about your gate, your property, and what’s not working, then schedule a time that fits your life.
2. 2
   We measure and quote. A technician visits, measures the opening with a laser, checks the soil and slope, and asks how you’ll use the gate. Then we hand you a written price. No pressure, no “today only” talk. You keep the quote and think it over.
3. 3
   We prep and protect your home. On install day, drop cloths go down and shoe covers go on before we step inside. We move what needs moving only after asking. If kids or pets are home, we use quiet tools where we can and work around nap time if you tell us to.
4. 4
   We install and test. Posts are set level and left to cure before the gate is hung. Every opener gets force-limit testing and safety-edge checks. We run the gate through full cycles while we watch the hinges, the track, and the motor together.
5. 5
   We clean up and show you the photo. Before we leave, we take a photo of the work area and show it to you. The gate is your gate now. You’ll get a walkthrough of the controls, and the 365-Day Done Right Promise stands behind the whole job. Cody Beckman’s name is on the work order, which means the responsibility is ours, not a subcontractor’s.

How Much Does Gate Installation Cost in San Francisco?

Our Service Area Near San Francisco

We install gates across San Francisco, from the Presidio to Portola and down to the Daly City line. The crew also covers Gate Installation in Oakland, Gate Installation in San Mateo, and nearby communities including Hayward, Berkeley, Richmond, San Leandro, Alameda, Walnut Creek, San Rafael, Danville, and Burlingame. Since every location is an independent local business working to the Cedarwell Care Promise, you get a local crew that knows your neighborhood’s soil, slope, and salt air. Typical lead time for a scheduled installation is 5 to 10 days after the measure and quote, depending on fabrication and weather.

Frequently Asked Questions About Gate Installation in San Francisco

Schedule Your Gate Installation Service in San Francisco Today

You don’t have to live with a gate that scrapes, a driveway you can’t pull into, or an opener that works only when it wants to. Call (628) 227-2771 and talk to a live person, day or night. We’ll schedule a free measure, hand you a written price, and install your gate with the Cedarwell C.A.R.E. values in place: clean floors, quiet tools, respect for your home, and a price you see before we touch anything. The 365-Day Done Right Promise stands behind the whole job.

Written by Cody Beckman, Owner at Latch and Post Gate Repair San Francisco, serving San Francisco since 2009.