Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South San Francisco, CA
Gate repair in South San Francisco comes down to one word: wind. The same gusts that push fog over Sign Hill and rattle the eucalyptus trees also work at your gate hinges, post mounts, and opener gears year-round. We’re Latch and Post Gate Repair, a Cedarwell-family gate specialist serving South San Francisco with three focused services: fixing gates, installing gates, and repairing electric gate systems. We’ll give you a written price before any work begins, and a live person answers when you call (628) 227-2771.
Why South San Francisco Homes Are Different
South San Francisco’s east side was built for industry and its western hills for views, and both create distinct gate problems. The 1950s-to-1970s homes near Westborough and along the older streets of Sunshine Gardens often still have their original swing gates on mild steel posts. Years of marine fog settle into the lower weld points, and rust doesn’t announce itself until a hinge tears free. Homes in Terrabay and the newer hillside developments, by contrast, come with automatic gates installed on steeper drives. Here the air is cleaner but the wind loads are higher, meaning opener arms and rack systems wear faster than the same equipment would in, say, Burlingame’s flats.
One thing our technicians always do on South San Francisco visits is check the seaward-facing side of the gate frame. On the hills above Sign Hill, we routinely see gates where the bay side shows rust bloom within two or three years while the inland-facing side still holds its powder coat. We also open the opener housing to look for fog-degraded circuit boards, because units that look fine from the outside can hide green corrosion on the control board from months of damp marine air wicking through the cable entry. These checks take a few minutes, and they’re part of every repair visit.
Styles & brands we work with
Our Main South San Francisco Services
South San Francisco homeowners call us for two jobs more than any other: repairing an existing gate that’s sagging, binding, or won’t stay latched, and installing a new gate that’s built for the wind and fog up on the hill. Electric gate systems are the third piece, and each of the three lives on its own page here.
Gate Repair in South San Francisco
Most repair visits in South San Francisco follow the same pattern: a gate that worked fine for years starts dragging on the concrete, sticks at the latch, or swings shut too hard because a hinge post has shifted. On older homes we often find the bottom hinge has pulled loose from the post, compounded by years of wind pushing the gate back against its stops. We carry replacement hinges, latch assemblies, and heavy-gauge post anchors in our trucks so most jobs finish in one visit. If your gate moves at all, we don’t charge for guessing, we give you a written price before touching anything. See the full service and pricing detail: Gate Repair in South San Francisco.
Gate Installation in South San Francisco
An installation in South San Francisco isn’t a pre-fab kit bolted to a post. The right gate for Westborough or the Sign Hill ridge has to hold its shape when the afternoon wind comes through at 20 miles an hour, and the posts need to be set correctly the first time so the hinges don’t walk out of alignment in year two. Our team starts by measuring the driveway slope, checking the existing post anchors, and choosing hardware rated for coastal air and steady wind load. Installations begin with a free measure and a written price; we won’t surprise you with materials you didn’t approve. See what’s included: Gate Installation in South San Francisco.
Electric Gate Repair in South San Francisco
Electric gates near the bay have a specific failure point you won’t find inland: the control board. South San Francisco’s marine layer keeps connectors damp even on sunny weeks, and we frequently replace fog-degraded boards in LiftMaster, Viking, and DoorKing openers that look clean until you open the cover. Other regular calls involve stripped rack gears from wind load on single-arm openers and limit switches that drift after a storm moves the gate an inch. Every electric repair includes testing the safety edges, force settings, and the manual release. Complete detail on this service: Electric Gate Repair in South San Francisco.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in South San Francisco
We’re factory-trained on the brands most common in South San Francisco’s East Side and Terrabay neighborhoods: Linear, Viking, Ghost Controls, and DoorKing, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. We stock common boards, remotes, and hinge parts on our trucks so most repairs complete same-day. If you’re not sure what brand you have, ourour brands page shows photos to help identify it.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South San Francisco, CA
In South San Francisco, the influence of salt air and constant wind means we lean on corrosion-resistant hardware on almost every job, and that choice shows up honestly in the estimate. Here’s what typical work looks like before variables like the condition of your current posts, the length of your gate, and the type of opener you own are measured:
| Service | Typical range in South San Francisco |
|---|---|
| Standard gate-latch replacement | $165 – $295 |
| Hinge replacement (set of two) | $185 – $340 |
| Gate realignment (sagging gate, shim & re-hang) | $245 – $425 |
| Post replacement or reset (single post) | $385 – $750 |
| Wood gate plank or panel replacement | $110 – $240 per panel |
| Full wooden gate installation | $1,600 – $4,200 |
| Steel or aluminum gate installation | $2,200 – $3,800 |
| Manual gate conversion to automatic | $2,750 – $5,500 |
| New electric opener installation | $1,450 – $3,200 |
| Electric opener control board replacement | $320 – $690 |
| Gate sensor or safety-edge replacement | $210 – $410 |
| Gate opener gear or arm replacement | $285 – $520 |
Prices shift in South San Francisco when salt damage has already thinned the metal around a hinge or when steep driveway access means your post has to be set deeper into the hill’s compacted soil. What never shifts: before we do anything, you get a plain written price for the entire job, so there’s no line-item surprise at the end. Locked pricing before work starts is how we run every visit.
Neighborhoods We Serve in South San Francisco
Our crew works across South San Francisco, and our dispatch comes from the brand’s San Francisco Bay Area office, so a call in the morning usually means a technician can reach most neighborhoods the same day or next morning. In the hill neighborhoods like Terrabay and Westborough, where wind exposure and marine layer are heaviest, there’s where most of our rust and circuit-board calls originate, while Sunshine Gardens and the older grid streets east of El Camino Real see more hinge and latch work from the original gates. We also serve:
- Westborough
- Terrabay
- Sunshine Gardens
- Sign Hill
- South San Francisco East Side
Service Area – Cities Near South San Francisco
From our South San Francisco jobs, we regularly head up the hill to San Francisco, CA, south along the Peninsula to San Bruno, CA and Burlingame, CA, and over the coastal range to Pacifica, CA. If you’re just over the border in one of those cities, call us at (628) 227-2771 and we’ll let you know when we can get to you.
Serving South San Francisco, CA - Our Local Coverage Area
We’re based in the South San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South San Francisco
In many cases, yes. Since we’re dispatched from the San Francisco Bay Area office, we can often reach South San Francisco neighborhoods the same day you call, especially for non-urgent hinge or latch repairs. For weekend or after-hours work, a live person answers around the clock at (628) 227-2771.
Most gate replacements on existing posts don’t require a permit in South San Francisco, but new gate installations with electronic openers sometimes trigger a city or HOA review, particularly in newer Terrabay communities. We’ll check with you before any work begins so you’re never caught off guard.
Yes. Our crews serve South San Francisco and the neighboring Peninsula cities, so if you’re near the border in San Bruno, Burlingame, or the Daly City side of the hill, we can usually help. Call (628) 227-2771 and we’ll confirm the soonest available time for your address.
If your gate is sticking, latching poorly, or not opening, call us at (628) 227-2771 for a free estimate. We’ll come out, measure, explain the issue in plain words, and hand you a written price before any screw is turned.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What South San Francisco Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco