Gate Installation in San Francisco - Free On-Site Survey, Written Price

Fast, Reliable Gate Installation Across San Francisco

A gate installation in San Francisco usually runs between $2,400 and $7,800 depending on whether you need a welded steel driveway gate, a pedestrian gate with an operator, or a custom-made piece to fit an odd, sloped opening. We’re Latch and Post Gate Repair San Francisco. We build, fabricate, and install gates across the city every week, and we know the specific things that go wrong here: salt air eating hardware, inward swing rules on tight sidewalks, and hillside soil that won’t hold a shallow post. Whether you’re in the Sunset, the Richmond, Bernal Heights, or over by McLaren Park, we’ll come measure, write up an exact price, and get it done right. Call (628) 227-2771 any time and a live person answers.

Call (628) 227-2771

Why Latch and Post Gate Repair San Francisco Is San Francisco’s Preferred Gate Installation Company

We’re not a general handyman service that happens to hang gates. We are the Gate Installation team in the Cedarwell family, and we have been doing this work since 2009. Homeowners in San Francisco call us because we show up in uniform, we lay drop cloths before we carry any tools inside, and we hand over a written price before the first cut or weld. That routine matters in a city where the average house is over a century old and the last thing anyone wants is metal shavings tracked across original Douglas fir floors.

Cody Beckman, who leads our crew here, has walked enough San Francisco lots to know what happens when a hinge post gets pushed inward by sidewalk rules for 30 years. He doesn’t guess. He measures, checks the footing, looks at how the gate swings, and then tells you what it will cost. Our customers across Noe Valley, the Richmond, the Sunset, and Portola keep telling us the same thing: the gate works, the crew cleaned up, and nobody had to chase an estimate that changed halfway through. That’s the job.

In San Francisco, a gate has to handle fog, salt wind, and a lot of use on narrow lots. We build for that reality. And every call gets answered by a person, 24 hours a day. No voicemail queue.

Gate Fabrication in San Francisco

Gate fabrication in San Francisco is what we do when an off-the-shelf gate from a big-box store won’t fit the opening, won’t match the house, or won’t survive the marine air. We weld steel and work in galvanized stainless where it counts. A custom fabricated pedestrian gate in San Francisco typically runs $2,800 to $5,500. A large double driveway gate, built to measure and powder-coated, usually lands between $5,000 and $9,800. You’ll see the exact line-item number in writing before we start anything.

Custom Steel Gates for Older Homes

Victorians and Edwardians in San Francisco rarely have standard openings. We match the existing hinge locations, gate height, and picket spacing, so the new gate reads like it belongs to the house. If you have an original iron gate that’s cracked at a weld, fabrication can often save more than replacing the whole piece.

Coastal-Grade Materials and Hardware

Two blocks from Ocean Beach, painted mild steel starts to go within a decade. We specify galvanized steel posts and stainless fasteners on anything west of 19th Avenue. The inside of the tubing gets treated too, because rust starts there first.

Automatic Gate Installation in San Francisco

Automatic gate installation in San Francisco means mounting an opener, running the power, wiring safety photocells, and sometimes building the gate itself to handle the weight of a motorized swing or slide. Most automatic gate jobs in the city run between $4,500 and $9,500 installed, including the operator, arms, safety sensors, and a sealed enclosure that stands up to fog. We’ll write that price down before any work begins.

Operators That Survive Fog and Salt

The biggest failure we see is condensation getting inside a cheap control box and shorting the board. We use sealed enclosures and corrosion-resistant connectors. The operators we install most often on this side of the city are DoorKing, LiftMaster, and Ghost Controls in San Francisco. Factory trained, and we keep common parts in our Bay Area stock so a San Francisco job doesn’t stall waiting on a bracket shipped from Ohio.

Sloped Driveways and Swing Direction

On a hill, an automatic gate that swings uphill has to fight gravity every cycle. That stresses the operator arm, the hinge pins, and the post. We size the motor up when we need to and anchor the post deeper. On a downgrade, we add a lock that keeps the gate from drifting open when the wind picks up off the Pacific.

Trusted Brands We Service in San Francisco

We install and service the gate brands San Francisco homeowners actually have, including LiftMaster, DoorKing, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. We’re factory trained on all of them, which means we diagnose the problem the first time instead of swapping parts to see what sticks. Because we keep common operator parts in local Bay Area stock, most San Francisco repairs and installs happen without a week-long wait for a ground shipment. If you have a gate already and the opener dies, we can usually match the existing brand.

Common Gate Installation Problems We See in San Francisco Homes

• Hinge post bases rotted out at the footing. Where the post meets the concrete, salt moisture wicks up from the ground every winter. On uphill properties in the Sunset and the Richmond, we see bases that look solid from waist height but are hollow below the surface. The fix is a new galvanized post set in a deeper footing, not a patch.
• Operators shorting out when fog condenses inside the enclosure. Automatic gates near the coast fail more often from moisture than from worn motors. A non-sealed box lets condensation sit on the control board overnight. We replace the enclosure and re-seal every entry point.
• Inward swing gates pushing sidewalk rules onto old posts. San Francisco requires many sidewalk-adjacent gates to open inward so they don’t swing into the public right-of-way. That’s fine when the post is solid. On a 1920s masonry pier that’s been soaking in fog for a century, inward swing means constant torque on tired hardware.
• Weld cracks at thin sections of historic iron gates. Older gates get hot in the afternoon sun and cool fast when the fog slides in. That daily cycle stresses the thinner decorative sections, and cracks show up near scrollwork and hinge plates. We can fabricate replacement sections that match thickness and profile.

Pricing for Gate Installation in San Francisco, CA

We Also Serve Cities Near San Francisco

Latch and Post Gate Repair San Francisco works right across the Bay. If you’re in South San Francisco, Alameda, Berkeley, or San Bruno, the same crew that handles Gate Installation in San Francisco can measure, quote, and install your gate. Same process: written price upfront, shoe covers at your door, cleanup photo before we leave.

FAQs About Gate Installation in San Francisco