Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Francisco, CA
San Francisco gates work harder than gates almost anywhere else. The fog and salt air eat unprotected hardware, the hills shift under posts, and many of the iron gates hanging in front of Victorian and Edwardian homes were built before electricity was common. We’re Latch & Post Gate Repair, a Cedarwell gate specialist serving San Francisco, and we focus on three things: repairing gates, installing new ones, and fixing the electric operators that open them. Call us at (628) 227-2771 and you’ll talk to a live person, any hour.
Why San Francisco Homes Are Different
San Francisco’s narrow, sloping streets and small lots mean many gates are custom-built to fit tight spaces or to secure steep driveways and garage entrances. You can’t always order a stock gate and bolt it in, because the opening might be 34 inches at top but 39 at the bottom, or the sidewalk rises at an angle that pushes hardware out of square. In neighborhoods like Glen Park, Noe Valley, and Buena Vista, we regularly see gates that had to be fabricated around retaining walls, staircases, or grades that off-the-shelf hardware can’t handle.
Coastal neighborhoods including the Outer Sunset and the Richmond have their own issue: persistent marine air and salt-laden wind accelerate corrosion on hinges, latches, and gate frames. What lasts five years in Sacramento might need replacement in three years here. That’s why we recommend stainless steel or galvanized components for any gate exposed to western fog, and why we stock marine-grade fasteners on our trucks.
Older neighborhoods like Pacific Heights and the Mission add another layer. Many original iron gates from the early 1900s are still in service, and they often don’t match modern latch or hinge patterns. Repairing them requires adapting new hardware to old dimensions without damaging the original scrollwork, which is careful work, not a quick swap. San Francisco also has sidewalk encroachment rules in many historic districts, which means some gates must open inward, not outward, and that changes the hinge and closer setup.
Styles & brands we work with
Our Main San Francisco Services
The three services San Francisco homeowners ask us for most are gate repair, gate installation, and electric gate repair. Each has its own page with local pricing, what to expect, and the exact steps we take. Start where the problem is.
Gate Repair in San Francisco
A sagging gate on a Lake Street walkway or a latch that won’t catch in the Excelsior usually needs more than a wrench. San Francisco gates fail in predictable ways: hinges corrode in the fog, posts lean as hillside soil moves, and old iron cracks along the weld joints. We show up with a written price before any work starts, match the hardware to the gate’s era where possible, and leave your floors protected from start to finish. Most standard repairs are quoted the same visit. See Gate Repair in San Francisco for detailed pricing and a full walkthrough.
Gate Installation in San Francisco
Installing a gate in San Francisco means measuring for a grade that runs uphill, accounting for a sidewalk that might slope, and sometimes setting posts into soil that shifts with the seasons. We handle the whole job: removing the old gate, setting posts in concrete, hanging the new gate level, and adjusting it so it swings clean every time. If the property is historic, we’ll match the style to the house rather than bolt on something generic. We always provide a written quote before ordering materials or scheduling the install. Full details here: Gate Installation in San Francisco.
Electric Gate Repair in San Francisco
Electric gate operators in San Francisco live in some of the hardest conditions for motorized equipment: constant moisture, salt air, and frequent cycling on steep driveways. We service the control boards, safety loops, backup batteries, and solar chargers on existing systems. Whether it’s a Viking board acting up or a Ghost Controls arm that stopped after a storm, we diagnose first, explain the fix in plain English, and give you the price in writing before we touch a wire. Electric gate work involves live power. Always use a trained professional. Electric Gate Repair in San Francisco covers the full process and costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Francisco
We’re factory-trained on the brands San Francisco families actually have, including Linear, Viking, Ghost Controls, and DoorKing. We keep common parts stocked on our vehicles, so many electric gate repairs are finished the same visit. For less common parts, see our brands for a complete list and turnaround expectations.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Francisco, CA
Here’s what San Francisco homeowners can expect to pay. Every price below is quoted in writing before any work begins, so the number you see is the number you approve.
| Service | Typical range in San Francisco |
|---|---|
| Gate repair diagnostic visit (applied to repair) | $49 – $99 |
| Standard gate latch or hinge replacement | $185 – $340 |
| Sagging gate reinforcement and re-hang | $225 – $450 |
| Post reset or replacement in concrete | $350 – $750 |
| Custom hardware adaptation for historic gates | $275 – $550 |
| New gate installation, residential | $1,200 – $4,500 |
| Electric gate operator replacement | $650 – $1,800 |
| Electric gate control board replacement | $350 – $800 |
| Safety loop or photocell repair | $225 – $500 |
San Francisco pricing runs higher than the regional average for two reasons: the terrain means more custom work, and the coastal air means we’re often replacing hardware with marine-grade materials rather than a like-for-like swap. By the time we give you the written price, we’ve already accounted for those costs. There’s no revised invoice at the end, no discovery fee, no surprise.
Neighborhoods We Serve in San Francisco
We serve the entire city of San Francisco, but we spend a lot of time in neighborhoods where gates do heavy lifting:
- Sunset District, including the Outer Sunset where salt air is hardest on hardware
- Richmond District, with older iron gates and dense morning fog
- Glen Park, where steep lots and retaining walls require custom fabrication
- Noe Valley, full of Victorian-era gates on narrow side yards
- Pacific Heights, with historic iron gates that need era-matched hardware
Most San Francisco service calls are scheduled within a day or two. For a gate that won’t close or an operator that won’t open, we often dispatch faster. Call us at (628) 227-2771 and we’ll give you a straight answer on when we can be there.
Service Area – Cities Near San Francisco
Our San Francisco Bay Area office coordinates gate service across the city and into the nearby communities. If you’re just outside the city limits, we also serve South San Francisco, CA, Alameda, CA, Berkeley, CA, and San Bruno, CA.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Francisco
Most non-emergency repairs in San Francisco are scheduled within one to two days. If a gate won’t close and your yard or garage is unsecured, we treat it as urgent and usually dispatch the same day. Call (628) 227-2771 and a live person will check the schedule for your neighborhood.
It depends on the scope and location. Replacing a hinge or latch does not require a permit. New installations or post replacements may require one, particularly in historic districts with specific design review rules. We’ll tell you during the estimate if your job needs city approval, and we can advise on the process. The price you approve is always quoted before any work begins.
Yes. Many of San Francisco’s Victorian and Edwardian homes have original iron gates that need repair rather than replacement. We match hardware to the gate’s era where possible and adapt modern components to old dimensions without damaging the original metalwork. If a full replacement is needed, we’ll recommend options consistent with the property’s character.
If your gate needs attention in San Francisco, call (628) 227-2771 for a free estimate. We’ll answer live, schedule a visit, and put the price in writing before anything is touched. No pressure, no fine print. That’s how we work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Francisco Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco