Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in San Francisco?
Gate repair in San Francisco typically costs between $175 and $650 for most common fixes, with the median job landing around $290. Complex electric gate repairs involving circuit boards or motor replacement can push into the $900 to $2,800 range. At Latch and Post Gate Repair San Francisco, you’ll always receive a written price before any work begins, so the number you’re quoted is the number you pay. For more details, see our 2026 San Francisco gate repair cost guide.
San Francisco brings its own set of variables to gate repair pricing. The city’s damp marine air accelerates rust on iron and steel hardware in the Sunset and Richmond districts. Hillside properties in Noe Valley and Glen Park put extra torque on hinges and posts. And many homes built before 1950 still have original gate posts set in unreinforced concrete. We factor all of this into a straightforward estimate before we touch a single bolt.
Gate Repair Cost Breakdown (2026)
Here’s what we see across San Francisco in 2026. These are real working numbers from actual jobs, not national averages that ignore local conditions.
| Repair Type | Typical Cost Range | Notes |
|---|---|---|
| Gate latch replacement | $120 – $280 | Includes hardware and labor; most common repair we do. |
| Hinge replacement (pair) | $180 – $420 | Steel hinges on wood gates; heavier wrought iron runs higher. |
| Sagging gate realignment | $150 – $350 | Adjusting hinges, adding anti-sag kit, or tightening post brackets. |
| Gate post repair | $350 – $900 | Resetting or reinforcing a leaning post; sometimes requires new concrete footing. |
| Gate post replacement | $650 – $1,500 | Wood or steel post set in new concrete; price depends on fence material and soil. |
| Electric gate opener repair | $250 – $750 | Limit switch, receiver, capacitor, or sensor issues. |
| Electric gate motor replacement | $900 – $2,800 | Brand-specific; LiftMaster and FAAC motors run the widest price spread. |
| Keypad or remote replacement | $150 – $400 | Includes programming for LiftMaster, Linear, FAAC, and others. |
| Full wooden gate replacement | $1,200 – $3,500 | Custom-built redwood or cedar gate, painted or sealed. |
| Full wrought iron gate replacement | $2,500 – $6,500 | Custom fabrication; powder coating adds $400 to $900. |
These ranges include parts and labor. What moves a job from the bottom of the range to the top? Material availability, gate weight, access to the job site, and whether the existing hardware is salvageable. A lightweight cedar gate in Bernal Heights with easily accessible hinges will land low. A heavy wrought iron gate on a steep Potrero Hill driveway with two post problems will land high, and still be worth every dollar when it closes smoothly again.
One thing that does not change: the written estimate. We provide it before we start, on every visit, with no pressure to accept. You can always call Latch and Post Gate Repair San Francisco at (628) 227-2771 and talk through your gate over the phone first, or search gate repair near me in San Francisco, CA to find us. A live person answers around the clock.
What Affects Gate Repair Pricing in San Francisco
- Gate material and weight. A hollow aluminum gate weighs a fraction of a solid wrought iron one. Heavier gates strain every component and often mean the difference between a $40 bracket and a $400 hinge rebuild.
- Proximity to ocean air. Homes west of Twin Peaks in the Sunset, Outer Richmond, and Parkside see accelerated rust and corrosion. What looks like a simple hardware failure is often the result of years of salt-moisture exposure, which means adjacent parts may be near failure too.
- Hillside pitch and drainage. A gate on an incline works against gravity constantly. Posts set in saturated clay soil, common in the Marina and Cow Hollow, shift more than those on the bedrock of Russian Hill. We address underlying drainage before resetting any post.
- Electric gate system age and brand. A 15-year-old Mighty Mule opener is usually easier and cheaper to repair than to keep patching. A newer BFT or FAAC system may only need a capacitor or limit switch. Brand matters, which is why our technicians train specifically on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Permit and code considerations. San Francisco’s Department of Building Inspection requires permits for new gate posts that exceed six feet in height, and for any electric gate that connects to primary driveway access. That’s a real cost and timeline factor, and we handle it as part of a complete estimate when it applies.
- Access to the work area. Narrow walkways, locked side yards, and steep driveways add labor time. We plan for this ahead of the visit, not as a surprise line item on the invoice.
How to Save on Gate Repair
You don’t have to overpay for a gate that works. Here’s how homeowners in San Francisco keep costs down without cutting corners on the finished result.
- Act on the first sign of trouble. A gate that sticks, squeaks, or leans a little today will cost less to fix than one that has broken a hinge and cracked a post in six months. Early attention is the single biggest money saver.
- Keep hinges and latches lubricated. A $12 can of dry lubricant applied twice a year in the west-side neighborhoods will extend the life of your hardware meaningfully. Avoid oil-based sprays that collect the grime and salt in the air.
- Let us quote the full job, not one piece of it. When we see a sagging gate, we look at the hinges, the post, and the latch together. You get one number for a complete fix rather than three separate visits.
- Ask about our written estimate before committing. It’s free, it’s detailed, and it tells you exactly what you’re paying for in the San Francisco market. Call (628) 227-2771 and we’ll walk through it with you on the spot.
What Our Repair Visit Looks Like
You want to know what happens when a technician from Latch and Post Gate Repair San Francisco arrives at your door. Here’s the routine, exactly as we run it.
We knock and introduce ourselves. We lay drop cloths wherever we’ll be working indoors, and we put on shoe covers before walking through your house to reach the backyard gate. If you have a dog, we’ll ask where they are before opening any gate. If your kids are napping, we’ll choose the quiet tools first.
Then we inspect the full gate: latch, hinges, posts, and any electric opener. We explain what we found in plain language and hand you a written price. You decide. Nothing moves until you say so.
Before we leave, we take a photo of the cleanup and show it to you. The 365-Day Done Right Promise covers every job we complete: if the repair isn’t right, we make it right. No fine print, no argument. That’s how Cody Beckman has run this shop since 2009 as part of the Cedarwell family, and it’s how every Latch and Post technician works in San Francisco today.
How Much Does an Electric Gate Repair Cost in San Francisco?
Electric gate repair in San Francisco runs from $250 for a sensor or limit switch replacement up to $2,800 for a full motor swap on a swing gate system. The most common electric gate service calls we get are for remotes that stopped working, keypads that won’t take codes, and gates that reverse direction after closing.
Here’s a practical way to think about it. If your gate opener is under eight years old and from a brand like LiftMaster, FAAC, or BFT, repair is usually the smart money. The circuit boards, receivers, and sensors from these manufacturers are common enough that we can diagnose and replace parts in one visit. If the opener is older than 12 years and has failed once already this year, replacement often costs less over the next two years than a repair.
Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because the right fix on the first visit means you aren’t paying twice for the same diagnosis. Every gate repair starts with the same written-price promise as any other job.
Can You Fix My Gate the Same Day in San Francisco?
Yes, in most cases. The majority of latch, hinge, and opener repairs we handle in San Francisco are completed in a single visit, with parts on the truck. If your gate needs a custom part or a fabricated post, we’ll give you a clear timeline in writing.
A live person answers our phone at (628) 227-2771 any time of day or night, so you can describe the problem and get an honest answer about timing before we schedule the visit. That’s part of the Cedarwell C.A.R.E. values we work by. No voicemail, no callback queue, no wondering if anyone heard the message.
Is It Cheaper to Repair or Replace a Gate in San Francisco?
Here’s a working rule from 16 years of Bay Area gate work: if the repair cost is under 40 percent of the replacement cost and the structure is sound, repair it. If the gate has rust through the frame, a bow you can see from the sidewalk, or a post that moves more than an inch when you push it, replacement is usually the better long-term spend.
Concrete numbers for San Francisco: a standard wooden gate replacement costs $1,200 to $3,500. A series of repairs over three years on a failing gate can easily reach $900 to $1,800, and you still have an older gate. The tipping point is structural integrity, not age alone.
We’ll give you our honest recommendation with numbers for both options. Written, no pressure. Call (628) 227-2771 for a free estimate and a straight answer.
FAQs – Gate Repair Cost
How much does it cost to fix a leaning gate post in San Francisco?
Fixing a leaning gate post in San Francisco costs between $350 and $900 for a reset and reinforcement, and $650 to $1,500 for full post replacement with new concrete. Hillside soil and older footings in neighborhoods like Glen Park and Mount Davidson often require deeper excavation. Call (628) 227-2771 for an exact quote, and you’ll get it in writing before we start.
How much does a gate latch replacement cost?
A gate latch replacement in San Francisco runs $120 to $280, including the new hardware and labor. We stock latches that match the common styles found on Victorians and Edwardians around the city. If your latch is sticking but the gate still closes, the fix may be even less.
Does Latch and Post charge for estimates?
No. Estimates from Latch and Post Gate Repair San Francisco are always free, and they always come in writing. You’ll see the full breakdown before you agree to anything. Call (628) 227-2771 and a live person will help you schedule a visit.
How much does it cost to repair a driveway gate opener?
Most driveway gate opener repairs in San Francisco cost between $250 and $750, depending on the failing component. Sensors, receivers, and limit switches land on the lower end, while capacitor and transformer failures run higher. Brand matters: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems each have their own parts pricing.
Can you work on a gate without disrupting my kids or pets?
Yes. We use quiet tools when we can, we ask where your pets are before opening any gate, and we’ll work around naptime if that’s what your household needs. Shoe covers and drop cloths go down before we step inside, and we show you a cleanup photo before we leave. That’s standard on every job, not an add-on.
Call Latch and Post Gate Repair San Francisco
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Latch and Post Gate Repair San Francisco has been part of the Cedarwell family since 2009, and we’ve spent those years fixing, installing, and restoring gates across this city for families who want a clean, straightforward result.
When you call (628) 227-2771, a live person answers, day or night. We’ll ask what the gate is doing, give you an honest sense of cost, and schedule a visit that respects your home and your time. You’ll get a written price before any work starts, a technician in uniform with shoe covers and drop cloths for the floors, and a photo of the cleanup when we’re done. If it’s not right, the 365-Day Done Right Promise means we make it right.
Call Latch and Post Gate Repair San Francisco at (628) 227-2771 for a free estimate today.
Pricing reflects the San Francisco market as of 2026. Latch and Post Gate Repair San Francisco offers free estimates – call (628) 227-2771.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Francisco, serving San Francisco since 2009.
What Our Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco