Gate Repair in Pacifica - On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Gate Repair Across Pacifica

Gate repair in Pacifica comes down to two things most contractors miss: the salt fog eating at your hinges, and the hillside soil shifting under your gate posts. We know both. Latch and Post Gate Repair San Francisco has been fixing gates on Pacifica’s steep driveways and coastal lots since 2009, and we’ve learned exactly what a Pedro Point wrought iron gate needs to survive another winter. If your gate sags, squeals, or won’t close cleanly, call (628) 227-2771 for a free estimate. We’ll send a background-checked technician who wears shoe covers, lays drop cloths, and writes you a price before touching anything.

Call (628) 227-2771

Why Latch and Post Gate Repair San Francisco Is Pacifica’s Preferred Gate Repair Company

Pacifica homeowners call us for the same reason they’d ask a neighbor which fix actually sticks: because we’ve done this specific job, on this specific terrain, hundreds of times. Our Gate Repair team is factory-trained on the brands families actually own here – Ghost Controls, Mighty Mule, DoorKing, and Elite among them – so we don’t guess at a fix. We show up with the right parts. We’re part of the Cedarwell family of independently owned gate specialists, and every job carries the 365-Day Done Right Promise: if the repair isn’t right, we make it right. No argument, no fine print.

We schedule calls to Pacifica around the reality of your streets – the hills, the narrow shoulders, the parked cars. Our technicians carry covered work mats and quiet tools, because we know that in a house with a sleeping baby or a nervous dog, the way we work matters as much as the fix itself. Calls are answered by a live person around the clock. When your gate motor dies at 11 p.m. in Sharp Park, you’ll talk to a human being, not a voicemail.

Sliding Gate Repair in Pacifica

Sliding Gate Repair in Pacifica usually means a custom steel or aluminum slide gate on a long hillside driveway, moving along a track that the salt fog is constantly trying to corrode. When the rollers pit or the track warps, the gate jerks, binds, or refuses to close all the way. We see this most often in neighborhoods like Fairway Park and Park Pacifica, where wide driveways and exposed lots give the marine air full access to the hardware. A typical sliding gate repair in Pacifica runs $280 – $620, depending on whether we’re replacing rollers and aligning the track or addressing motor and limit-switch problems.

Track and Roller Restoration

We pull the gate, inspect the track for pitting and warping, and replace hardened rollers and bearings so the gate moves without groaning. Stainless steel components go in wherever possible – they’re not an upsell, they’re the difference between a repair that lasts two years and one that lasts eight, especially within a mile of the coast.

Operator and Limit Switch Repairs

If the motor runs but the gate stops short or overtravels, the limit switches or the control board are usually the culprit. We test the full circuit, replace what’s failed, and set the stops so the gate closes flush against the post without slamming. Every repair includes a written price before we open a single panel.

Wrought Iron Gate Repair in Pacifica

Wrought Iron Gate Repair in Pacifica is as much about geometry as it is about metal. These gates are heavy – a double swing gate at the top of a Pedro Point driveway can weigh 400 pounds or more – and when the hinge post shifts in winter-soaked hillside fill, the whole gate sags and the lock stops engaging. Repair means more than fresh paint. We re-set posts in deeper concrete footings, re-hang the gate on new stainless hinges, and correct the rack and pinion alignment so it swings smoothly. Most wrought iron repairs in Pacifica run $350 – $850, depending on post work and the scope of the corrosion.

Post Re-Setting and Structural Correction

In the Pedro Point and Sharp Park neighborhoods, gate posts set into hillside fill often lean forward after a wet season. We excavate around the post, pour a deeper footing with proper drainage, and brace the post plumb before re-hanging the gate. This is the fix that stops the annual sag.

Corrosion Treatment and Hinge Replacement

Salt-laden fog pits raw steel fast. We grind back the rust, treat the surface, and replace hinges and pins with coated or stainless hardware. We choose pet-safe lubricants, and we schedule around nap time if quiet matters to your household.

Trusted Brands We Service in Pacifica

Our Pacifica customers own a lot of Ghost Controls and Mighty Mule systems on swing gates, and a good number of DoorKing and Elite operators on sliding gates. We stock common parts for these brands in our Bay Area warehouse, which means most repairs in Pacifica happen on the first visit rather than after a week of waiting on backorder. Factory-trained means exactly that: we’ve been through the manufacturer training, not just a YouTube video. If your gate runs on something else, ask – if it’s a gate, we’ve likely worked on it.

Common Gate Repair Problems We See in Pacifica Homes

• Salt-fog corrosion on hinges and tracks. Persistent ocean air accelerates rust on swing gate hinges and slide gate tracks, causing squealing, binding, and eventually seized rollers. Stainless hardware and regular maintenance are the only real defense this close to the water.
• Hillside post shift after winter rains. In Pedro Point and Sharp Park, gate posts set into hillside fill often move after a wet season, making gates sag and latch posts drift out of alignment. This usually requires re-setting the post in a deeper concrete footing, not just adjusting the hinge.
• Moisture intrusion in gate operators. Exposed driveways in Pacifica leave operators vulnerable to fog and rain getting into control boards, loop detectors, and limit switches. Sealed enclosures and dielectric grease on connections prevent most of these failures.
• Custom gate misalignment from daily use. Heavy ornamental gates on steep driveways put steady strain on hinges and motors. Small misalignments compound quickly, and a gate that’s a quarter-inch out of plumb today will be an inch out by spring.

Pricing for Gate Repair in Pacifica, CA

We Also Serve Cities Near Pacifica

Our crews serve Pacifica and the surrounding Peninsula communities, including San Bruno, South San Francisco, Burlingame, and San Mateo. If you’re in one of those cities and dealing with a stubborn gate, the same team, the same warranty, and the same written-price policy apply. Call us at (628) 227-2771 and we’ll get you scheduled.

FAQs About Gate Repair in Pacifica