Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across San Bruno
A sagging gate or a dead opener in San Bruno usually comes down to two things: moisture and time. The coastal fog that rolls over the peninsula each morning works its way into hinges, control boards, and posts, and the 1950s-era gates on many San Bruno homes just weren’t built to shrug that off. Latch and Post Gate Repair San Francisco fixes gates across San Bruno every week, and we know exactly what the fog does to them. If your gate won’t open, drags on the driveway, or the keypad only works when it’s dry, call us at (628) 227-2771. We answer live, and we’ll give you a written price before any work starts.
Why Latch and Post Gate Repair San Francisco Is San Bruno’s Preferred Gate Repair Company
We’re a Cedarwell-family gate specialist, and that shapes how we work in San Bruno - learn more about our Electric Gate Repair in San Bruno. Our technicians are background-checked, uniformed, and trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we walk onto a property off Sneath Lane or San Bruno Avenue, we bring a documented care routine: shoe covers and drop cloths before we step inside, quiet tools when kids are napping, and a cleanup photo before we leave. Every job, from a hinge replacement to a full automatic gate rebuild, is backed by the 365-Day Done Right Promise. If it isn’t right, we make it right. No fine print, no argument.
We also know San Bruno’s housing stock. The 1940s and 1960s single-family homes here often have original driveway gates with non-standard post spacing and dimensions that were never designed for modern openers. That means custom bracket fabrication, sealed control boards, and corrosion-resistant hardware are part of the job – not extras. You’ll see every line item in writing before we touch anything.
Styles & brands we work with
Sliding Gate Repair in San Bruno
Sliding gate repair in San Bruno usually comes down to what the marine air has done to the steel track and the rack-and-pinion assembly. When salty fog condenses on the roller track night after night, mild steel pits and rusts. Once the rack teeth lose their edge, the motor tries to move the gate but the pinion skips – and you hear that jerky, grinding motion. The gate isn’t broken. It’s fighting a ruined track.
Most slide gate repairs we do in San Bruno range from $350 to $1,200 depending on the length of track, hardware condition, and whether the opener needs a new receiver board. Replacing a pitted 20-foot steel track with powder-coated or galvanized rail on a typical driveway gate is often in the $700 to $950 range before adding a new motor or limit switch if those have failed too.
Track and Rack Replacement
Coastal moisture pits the steel track first. We check the roller bearings, the rack gear, and the end stops before we condemn anything. When feasible, we replace the track with corrosion-resistant material and re-align the rack so the pinion seats cleanly. Many San Bruno gates were never given a drainage path under the track; we correct that so standing water doesn’t repeat the damage.
Motor and Limit Switch Work
Your motor may be fine. In our experience, perhaps half the “dead motor” calls around San Bruno turn out to be corroded limit switches or a control board arcing from condensation. We test the motor winding, then move to the limit switch logic and fuse block before recommending a replacement. We’ll show you the failed part and price a new one in writing.
Wrought Iron Gate Repair in San Bruno
Wrought iron gate repair in San Bruno tends to be a fight against rust blooms at the base of pickets, around weld joints, and where the gate hangs from the hinge post. The fog doesn’t just sit on the surface; it gets into open welds and unsealed screw holes and starts working from inside. A gate that looks fine may be nearly rusted through at the bottom rail.
Typical wrought iron repairs in San Bruno fall between $250 and $900. That covers grinding out rust blooms, welding in new steel where sections have thinned, and repainting with a zinc-rich primer and marine-grade topcoat. Full re-hangs with new heavy-duty hinges on an existing iron gate typically run $450 to $800 when the post is sound.
Rust and Weld Repair
For older San Bruno iron gates, we remove the rust where it actually is, not just where it shows. We weld in new sections where metal loss has compromised the frame, then treat the replacement steel with a corrosion inhibitor before priming and painting. If the hinge barrels are seized, we cut them out and install new weld-on hinges rated for the gate’s actual weight.
Gate Realignment and Re-Hanging
Some iron gates in San Bruno are original to the home and were welded to posts set without concrete collars. Over decades, the post tips and the gate drops. We re-set the post, fabricate a new bracket if the original is cracked, and fine-tune the reveal so the gate swings clear even on a sloped driveway. You don’t always need a new gate. Often you just need the old one hung correctly.
Trusted Brands We Service in San Bruno
We’re factory-trained on the equipment people in San Bruno actually have installed. That means LiftMaster and FAAC boards, BFT and Viking operators, Linear keypads and receivers. We don’t sell you a universal part and hope it works. Our trucks carry brand-specific components for the most common failures we see around San Bruno: moisture-sealed control boards, galvanized rack sections, stainless hinge barrels, and limit switches rated for wet environments. When we do need a non-stocked part, our dispatch is coordinated from our San Francisco Bay Area office, so the part is routed to your San Bruno job quickly, often the same week.
Common Gate Repair Problems We See in San Bruno Homes
We’re called to San Bruno homes for the same handful of problems every week. Here’s what’s usually happening:
- Condensation-shorted control boards: Original 1950s operator housings were never weather-sealed. Dense fog cycles push moisture inside, the board arcs, and the gate stops dead. We replace the board and seal the housing, which often prevents the same failure from returning.
- Swelling wood gates that bind: In Mills Park and Crestmoor, evening fog settles on wood swing gates. The gate absorbs water, the latch-side drops, and the gate catches on sloped driveways. We re-hang or trim and seal, depending on how far the wood has gone.
- Pitted roller tracks on slide gates: Salty air from the coast eats mild steel. The track surface roughens, wheel bearings drag, and the chain or rack jumps. A track replacement is usually the right fix, not another motor.
- Leaning hinge posts without footings: Many 1950s tract homes in San Bruno had gate posts set directly into soil, no concrete collar. Years of fog and slope settling push the post out of plumb. We excavate, pour a proper footing with galvanized anchors, and re-set the post so the gate holds its line.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in San Bruno, CA
Gate repair prices in San Bruno run a real range, and we’d rather name it than make you wait for a surprise. A standard gate latch replacement or hinge re-align typically runs $200 to $400. A sliding gate track replacement on a typical San Bruno driveway runs $700 to $950. Re-hanging an existing wrought iron or wood gate with a new post footing lands between $600 and $1,100. Board replacements for LiftMaster or FAAC openers fall between $300 and $650 with the part and labor. Every price is written down and agreed before we do anything. You turn down the quote, we leave – no charge.
Call (628) 227-2771 for a free estimate on your Gate Repair in San Bruno. A live person answers.
We Also Serve Cities Near San Bruno
Our Gate Repair team serves San Bruno and the nearby communities of South San Francisco, Pacifica, Burlingame, and San Mateo. If your property sits close to any of those lines and you’re not sure which side of the map you’re on, call us. We’ll figure it out and point you to the right crew.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Bruno
Wood gates in San Bruno absorb moisture directly from the fog, and the added water weight makes the latch side droop enough to catch on a sloped driveway. This worsens when the hinge post was set without a proper concrete footing, which is common in Mills Park and Crestmoor. The fix is usually a combination of re-hanging, sealing the wood, and, where the post has moved, re-setting it in a new footing with galvanized anchors. Then the fog still comes in, but the gate doesn’t move. Call us for a written quote: (628) 227-2771.
Yes, when it is solid. Hand-forged hinges, heavy iron frames, and original wood with good heart often outlast the modern replacement parts. We evaluate the gate and the posts before we recommend anything. If the hardware is sound, we preserve it, clean it, and upgrade only the failing components – like a new sealed control board or a corrosion-resistant safety edge. If the hinge barrel is seized or the post is rotted through, then retrofitting new hardware to the old gate may be reasonable, but sometimes replacement is the cheaper long-term call. We will show you the failed part and price both paths. Estimates are free.
Usually not. A jerking San Bruno slide gate often means the steel track is pitted from marine air and the rack and pinion are skipping teeth. The motor is working; it just can’t move the gate cleanly. We test the motor current draw before anything else. If the motor is healthy, you’re looking at track and rack replacement, not a new operator. That’s typically a $700 to $950 fix on a San Bruno driveway. Call (628) 227-2771 for an exact quote.
For most residential gate post footing replacements on private property, San Bruno does not require a separate building permit if the work is a like-for-like repair and the gate remains within the existing setback and height limits. The rules change when you are replacing a driveway gate that faces a public sidewalk or altering the electrical feed to an operator. We check the scope of your specific job and let you know if City sign-off is needed before we start. When it is needed, we prepare the simple submittal for you and coordinate the inspection. That way you don’t get caught holding an open trench and a stop-work order.
Moisture is condensing inside the keypad housing and shorting the circuit contacts. Afternoon sun and drier air evaporate it, but by morning it’s back. The fix is a sealed keypad rated for wet locations, plus a drip loop on the low-voltage wiring so condensation runs away from the terminals instead of into them. In San Bruno’s fog belt, most afternoons are fine; it’s the mornings that break things. This is a common call for us. We stock sealed keypads that hold up in this climate. Call (628) 227-2771 and we can quote it over the phone in minutes.
Call Latch and Post Gate Repair San Francisco for Gate Repair in San Bruno
If your gate is sagging, stuck, or unresponsive in San Bruno, call (628) 227-2771. We’ll give you a free, written estimate before any work begins, and answer every question in plain language. Our technicians arrive in uniform, with shoe covers and drop cloths for indoor work, and we’ll leave your driveway cleaner than we found it. Every repair is covered by the 365-Day Done Right Promise. If it’s not done right, we make it right.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Francisco, serving San Bruno and the surrounding Bay Area.