Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Martinez
Most gate problems in Martinez come down to two parts: the post that carries the weight and the hardware that lets it move. A sagging gate is almost never a panel problem. It’s a footing problem, a hinge problem, or both. We work on older gates every week across Martinez – from the Victorians near downtown to the ranch homes up toward the hills – and we’ll give you a straight answer about what’s actually wrong, what it costs to fix, and whether repair is smarter than replacement. Call (628) 227-2771 and a live person answers, day or night.
We are Gate Repair specialists, not general handymen. That focus matters in Martinez, where a lot of what hangs in your driveway was built before modern gate operators existed.
Why Latch and Post Gate Repair San Francisco Is Martinez’s Preferred Gate Repair Company
Martinez homeowners call us because we know the difference between a 1920s ornamental iron gate and a big-box aluminum panel, and we treat them differently. Our techs walk the same streets you do. We know the salt air that blows through the Carquinez Strait, the older footings along Alhambra Avenue, and the historic downtown blocks where preservation rules come before convenience. That local knowledge changes how we quote the job, what parts we bring, and how carefully we work around your home.
We’re part of the Cedarwell family of independently owned and operated gate specialists. Founded in 2009, Latch and Post Gate Repair has always been built around one idea: a clean, careful repair done at an honest price. Every visit starts with a written price before any work begins. Our techs are background-checked and uniformed. They put on shoe covers before stepping inside, lay drop cloths where they walk, and show you a photo of the cleanup before they leave. That’s the Cedarwell Care Promise, and it’s included on every job. No upsell, no fine print.
When your gate is down, you want someone who answers the phone. We do. A live person picks up 24/7 – no voicemail, no callback queue, no “press 2 for service”. Nights, weekends, holidays included. Cody Beckman leads our team, and the standard he sets is simple: treat every Martinez home like our own.
Dispatch and scheduling for the Bay Area is coordinated from our San Francisco office, and crews serve Martinez locally. The tech who shows up knows Martinez because he works here.
Styles & brands we work with
Metal Gate Repair in Martinez
Metal Gate Repair in Martinez means working with steel, wrought iron, and ornamental iron that has often spent decades in the path of Carquinez Strait wind. Salt air and moisture settle into hinges, posts, and welded joints. What starts as a squeak becomes a bind, then a sag, then a breakdown. We cut out rust, weld cracks, straighten sagging panels the right way (by resetting the post, not bending the steel), and treat the metal so it holds up longer against Martinez’s specific weather.
Most metal gate repairs in Martinez run $180 to $495 for hinge replacement or post resets, and $275 to $750 for weld and rust repair depending on how much material needs to be cut out and replaced. You’ll see the exact number in writing before we touch anything.
Hinge and Post Reset
A metal gate that drags on the driveway usually has a post that has shifted or rotted at the footing. We reset the post in fresh concrete, re-hang the gate, and adjust the hinges so the panel closes smoothly without scraping. This is the fix that actually lasts.
Weld and Rust Treatment
Salt air near the waterfront accelerates rust on ornamental iron, especially at the bottom rails and hinge plates. We grind out corrosion, weld fresh steel where the metal has thinned, and apply rust-inhibiting primer and paint matched to your gate’s finish. It won’t look patched. It’ll look right.
Wood Gate Repair in Martinez
Wood Gate Repair in Martinez often means preserving a gate that matches the original character of an older home. Many properties near downtown and in the surrounding hills still have original redwood or cedar gates hung on cast-iron hinges. Wood swells in winter rains and shrinks in summer heat. Hinge screws pull loose. The bottom rails rot where moisture wicks up from the ground. We rebuild rails, replace rotted sections with matching lumber, re-hang panels, and reinforce corners so the gate doesn’t rack.
Wood gate repairs in Martinez typically run $195 to $425 for sag correction, hinge re-hanging, or rail replacement, and $350 to $800 when we need to rebuild a significant section of the gate or replace a rotted post. Every estimate is written and agreed before work starts.
Post and Footing Replacement
If the hinge post wobbles when you push on it, the problem is at the base. We dig out the old footing, set a new post in properly drained concrete, and let it cure before re-hanging the gate. That’s the difference between a repair that lasts and a recurring sag.
Sag Correction That Holds
Straightening a wood gate panel without fixing the post is a bandage. We check the post first, then the hinges, then the panel itself. When we’re done, the gate closes square and doesn’t drag on the latch side.
Trusted Brands We Service in Martinez
We’re factory-trained on the operators Martinez homeowners actually own – FAAC, BFT, Linear, and Viking among them. If your gate has an older control board that’s failed, we can often source the exact replacement or a current equivalent that fits your existing frame. Our vans carry common parts and fasteners for these brands so we can complete most repairs the same day, including retrofits on historic gates that need modern safety equipment. You don’t have to wait a week for a part to ship.
Common Gate Repair Problems We See in Martinez Homes
- Rotting hinge posts on pre-1940s gates. Decades of winter moisture wicking up through the footing leaves the post soft where it matters most. We reset the post rather than forcing the panel straight.
- Rusted rack and pinion drives on slide gates. The Carquinez Strait’s salt-laden wind is hard on slide gate tracks and drive gears, especially near the waterfront and on older ranch properties. Regular lubrication and rust treatment extend the life of that hardware.
- Obsolete operators without entrapment protection. Older automatic gates in Martinez often lack photo-eyes or edge sensors. We retrofit modern safety devices onto the existing gate while keeping the original look.
- Sagging swing gates on narrow historic driveways. Original gates on downtown Victorians were often hung on undersized posts by today’s standards. The fix is usually a new, heavier hinge post with a deeper footing, not a new gate panel.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Martinez, CA
Here’s what you can expect to pay in Martinez:
- Gate realignment and hinge adjustment: $150 to $285
- Post reset with new concrete footing: $275 to $550
- Weld and rust repair on ornamental iron: $275 to $750
- Wood rail or panel section rebuild: $195 to $425
- Operator or control board replacement: $350 to $900 depending on brand and features
- Full gate replacement (metal or wood): $1,200 to $4,500 for typical residential gates
The written price you get before work starts is the price you pay. No surprises after the job is done. If a repair would cost 70% or more of a replacement, we’ll tell you that honestly and let you decide. Call (628) 227-2771 for a free estimate – we’ll come out, look at the gate, and put the number in writing.
We Also Serve Cities Near Martinez
Our gate repair service area includes Walnut Creek, San Pablo, Berkeley, and Richmond. If you’re in a neighboring city and need a gate specialist who shows up clean, quotes honestly, and answers the phone around the clock, we’d be glad to help. Call (628) 227-2771.
What Makes Martinez Gates Different
Unlike newer East Bay suburbs where gates are often standardized aluminum or vinyl, Martinez’s historic downtown district is filled with pre-1940s custom ornamental iron and wood gates that must be repaired in place to comply with preservation guidelines. We routinely replicate hand-forged details that aren’t mass-produced anymore. Off Alhambra Avenue near downtown, we rebuilt a sagging original wrought-iron swing gate on a 1920s Victorian whose hinge post had rotted at the footing. Our techs reset the post with a deeper concrete footing, corrected the sag with a new heavy-duty hinge post, and retrofitted a modern LiftMaster gate operator with a safety photocell and keypad entry while preserving the ornamental ironwork. That’s the kind of work you can’t hand off to a general handyman.
Every gate comes down to two parts – the latch that holds it and the post that carries it. In Martinez, those parts are often older than the people opening them. We know how to fix them the right way.
Serving Martinez, CA - Our Local Coverage Area
We’re based in the Martinez area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Martinez
Yes. We repair original ornamental iron gates in place whenever possible. That means welding cracks, replacing rotted sections with new steel shaped to match your existing scrollwork, and resetting original posts rather than swapping in off-the-shelf panels. Many downtown properties fall under preservation review, and our approach keeps the original gate in service without triggering a replacement review. Call (628) 227-2771 and we’ll tell you exactly what your gate needs.
It’s usually both salt air and worn track hardware. Salt-laden wind off the strait accelerates rust on the rack and pinion drive, and the grinding you hear is often a rusted gear teeth against a corroded track. We clean the drive, replace rusted components, and lubricate with products that hold up in a salt-air environment. A typical slide gate track and drive repair in Martinez runs $250 to $550 depending on how much of the rack needs replacement. Call (628) 227-2771 for an exact quote.
Almost never. When a gate sags but the hinges are intact, the problem is usually the post. The post has shifted or rotted at the footing and the whole assembly has dropped. We reset the post in a new concrete footing and re-hang the same panel. That fix usually runs $275 to $550 in Martinez and saves you the cost of a gate you don’t need. Call (628) 227-2771 and we’ll confirm it’s the post, not the panel.
Yes. We retrofit modern operators from LiftMaster, FAAC, and BFT onto existing ornamental iron gates without changing the gate itself. We mount the operator arm on the inside face, run the wiring discreetly, and add photo-eyes and edge sensors so the gate meets current safety standards. Your gate keeps its original look. A typical operator retrofit on an older Martinez gate runs $1,200 to $2,800 installed, including safety devices. Call (628) 227-2771 for a written quote.
Yes, in most cases. Operators installed before UL 325 took effect may not have entrapment protection, and that means the gate is not compliant with current safety standards. We can retrofit photo-eyes and edge sensors onto your existing gate without replacing the whole system. It’s a safety issue, not just a code issue – a gate without entrapment protection can injure a child or pet. Call (628) 227-2771 and we’ll assess what your gate needs.
Call Latch and Post Gate Repair in Martinez
If your gate is sagging, grinding, rusting, or dead, call (628) 227-2771. A live person answers. We’ll schedule a visit, put the price in writing before any work begins, and treat your home the way we’d treat our own – shoe covers, drop cloths, and a cleanup photo before we leave. You’ll get the 365-Day Done Right Promise: if the repair or installation isn’t right, we make it right. No argument, no fine print.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Francisco, serving Martinez since 2009.