Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Richmond, CA
Gate repair in Richmond means working with salt air, steep hills, and homes built when Eisenhower was president. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we focus on one thing: gates that open, close, and hold. Richmond’s mix of 1940s wartime cottages, industrial waterfront properties, and newer hillside builds means most of our work falls into two camps – corroded hardware near the Bay or strained openers on sloped driveways. If your gate is sagging, sticking, or refusing to move, call (628) 227-2771 and a live person will answer, any hour.
Why Richmond Homes Are Different
Richmond sits on the eastern shore of San Francisco Bay, and that location shapes every gate we touch. Morning fog rolls through Point Richmond and the Iron Triangle most of the year, carrying salt and moisture that accelerates rust on hinges, tracks, and gate motors. A steel gate that would last fifteen years in El Sobrante might show serious corrosion in eight here if it isn’t coated and maintained for marine air.
The housing stock adds another layer. Central and south Richmond are full of modest bungalows and wartime cottages with narrow driveways and chain-link or simple swing gates, many still carrying original hardware from the 1950s through the 1970s. Those old hinges and latch posts were built for lighter gates. When they misalign, which they do often, the gate drags or won’t latch at all. In the Richmond Hills, the story flips: longer, steeper driveways with automated iron or steel gates that put constant strain on openers and rollers. The slope means the motor works harder on every cycle, and mechanical failures come faster there than they do on flat lots across the border in San Pablo.
One more Richmond-specific pattern: in the Iron Triangle, many gates sit tight against the sidewalk with almost no setback. Any repair has to account for foot traffic, bikes, and shopping carts brushing past all day. That’s not a detail you’d notice from a photo, but it changes how we set hinges and choose hardware.
Styles & brands we work with
Our Main Richmond Services
Most Richmond homeowners call us for one of three things: a gate that won’t latch or swing, a new gate built for the property’s conditions, or an electric opener that stopped responding. Each service has its own Richmond page with full pricing and details.
Gate Repair in Richmond
When a Richmond gate sags or won’t close, the culprit is usually corroded hinges, a shifted latch post, or hardware that’s simply outlived its era. Near the Bay, we frequently replace hinge brackets and latch assemblies that salt air has eaten through, and in the Richmond Hills we see spring fatigue from gates fighting gravity on every open. Our technicians carry replacement parts for the common 1950s-70s hardware still found on wartime cottages, so one visit usually finishes the job. Here is the full breakdown: Gate Repair in Richmond.
Gate Installation in Richmond
New gates in Richmond need to be chosen for the specific site, not the catalog. A flat lot in central Richmond can take a lighter swing gate, but a steep Richmond Hills driveway usually calls for a steel frame, heavier posts set deeper, and hardware rated for constant slope load. We quote the complete job in writing before any work starts, including concrete footing, post setting, gate fabrication, and hardware. The details are on this page: Gate Installation in Richmond.
Electric Gate Repair in Richmond
Electric openers near the Bay fail in predictable ways: circuit boards corroding, photo-eyes fog-misted, limit switches sticking, and motors burning out from slope strain in the hills. We service LiftMaster, DoorKing, Elite, and Ghost Controls systems, among others, and we trouble-shoot the whole run, not just the motor, when a Richmond opener goes down. Read the full scope here: Electric Gate Repair in Richmond.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richmond
We’re factory-trained on the gate equipment Richmond homeowners actually have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common parts for these models are stocked locally, which keeps most repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Richmond, CA
These are the typical ranges we quote in Richmond. You will always see your exact price in writing before any work begins; never a surprise after the fact.
| Service | Typical range in Richmond |
|---|---|
| Gate latch or hinge replacement | $120 – $290 |
| Sagging gate alignment and reinforcement | $180 – $400 |
| Gate post reset or replacement | $300 – $650 |
| Chain-link gate repair | $140 – $340 |
| Steel or iron gate repair | $200 – $480 |
| Gate opener motor replacement (LiftMaster, DoorKing, Elite) | $450 – $1,100 |
| Gate opener circuit board or limit switch repair | $180 – $420 |
| Photo-eye or safety sensor replacement | $120 – $260 |
| Full gate installation (materials included) | $1,500 – $6,000+ |
| Electric gate opener installation | $2,500 – $5,500 |
In Richmond specifically, proximity to the Bay pushes corrosion-related repairs toward the upper end of these ranges, and steep Richmond Hills driveways add labor to opener work because the gate mechanism has to be braced and tested under constant load. The written quote you approve is the price you pay. If we find something unexpected when the work is underway, we stop and show you before proceeding.
Neighborhoods We Serve in Richmond
We work across the city, from the flat industrial lots near the waterfront to the winding streets of the hills. Our crews know which neighborhoods have sidewalk-tight gates and which have slope-strained openers before they arrive.
- Iron Triangle
- Point Richmond
- Richmond Hills
- Marina Bay
- North & East
Most Richmond calls are answered by a technician the same day, and we schedule around the fog-clearing hours when working on electrical components outdoors.
Service Area – Cities Near Richmond
Beyond Richmond, we serve the surrounding East Bay and North Bay communities with the same written-price routine and the same cleanup care. That includes San Pablo, CA, Berkeley, CA, San Rafael, CA, and San Francisco, CA. Dispatch and scheduling are coordinated from the brand’s San Francisco Bay Area office; crews serve Richmond locally.
Serving Richmond, CA - Our Local Coverage Area
We’re based in the Richmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richmond
Most Richmond calls are answered by a technician the same day, often within hours for urgent failures like a gate that won’t close and secure the property. Call (628) 227-2771 and a live person will take your details and set the dispatch, no voicemail queue.
Most direct gate replacements using existing posts do not require a permit in Richmond, but new automated gates with electrical runs often do, along with safety-edge requirements. We check the current Richmond municipal requirements for your specific project and include any needed permit work in the written quote.
Yes, we cover the entire city, from the Iron Triangle’s tight sidewalk-front gates to the Richmond Hills’ steep automatic driveways, and the waterfront areas of Point Richmond and Marina Bay. No neighborhood is too small for a call.
If your Richmond gate is giving you trouble, call (628) 227-2771 for a free estimate. Cody Beckman and the Latch & Post team will give you a straight answer, a written price, and a gate that works.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richmond Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco