Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Oakland, CA
Gate repair in Oakland usually comes down to two things: rust from the marine layer and sag from old hardware on pre-1940 homes. Most of our Oakland calls involve a custom iron or wood gate that has shifted out of square because the post footing moved in clay soil, or because hinges that are original to a 1920s Craftsman are finally failing. We give you a written price before any work starts, and you can reach a live person at (628) 227-2771 any hour, day or night.
Why Oakland Homes Are Different
Oakland’s housing stock was largely built before 1940, and the gates on those homes usually match the house: heavy, custom, and built to last a very long time. The problem is that the ground under them moves. In the Oakland Hills, hillside soils absorb winter rain and swell, which pushes posts gently out of plumb. In West Oakland and other flatland neighborhoods, the clay shrinks and cracks through the dry season, and gates settle unevenly. Either way, a gate that swung cleanly for decades starts dragging on the latch side or binding at the hinge.
The climate adds a second layer. Homes within a mile of the bay sit in fog for much of the summer, and wrought iron and steel gates there rust faster than the same gate would six blocks uphill. In neighborhoods like Rockridge and Temescal, original 1920s iron driveway gates often have hinges set into concrete pilasters. When tree roots crack those pilasters, the hinge loses its seat, and the gate leans. That repair usually means cutting out the old footing and re-pouring around the post, not just tightening bolts.
Wood gates have their own rhythm here. Dry, warm summers pull moisture out of redwood and cedar, and boards shrink and open gaps. Winter rains swell them back, and gates stick against the frame. The fix is often seasonal realignment rather than replacement, which matters when the gate is original to the house.
Styles & brands we work with
Our Main Oakland Services
Most Oakland homeowners call us for one of three reasons: a gate that no longer latches or swings, a gate that needs to be designed and installed from scratch, or an electric opener that has stopped responding. Each has its own page here.
Gate Repair in Oakland
Repair work in Oakland most often means realigning a sagging gate, replacing worn hinges or a failing latch, or rebuilding a post footing that has cracked in the clay. On older homes, we match existing iron sizes and wood species so the repair doesn’t stand out from the original gate. Because Oakland’s soil moves with the seasons, we check the post and hinge alignment carefully before recommending a fix, so the repair outlasts the next winter’s rain. Every repair includes a written price before we start and a cleanup photo before we leave. See the full scope here: Gate Repair in Oakland.
Gate Installation in Oakland
New gate installations in Oakland usually involve either matching an existing Craftsman or Mediterranean Revival home with a period-appropriate wood or iron design, or installing lighter aluminum on newer infill townhomes. We measure the opening, assess the driveway slope and soil condition, and quote the complete job in writing before anything is ordered. Installations take several days to schedule, since materials are measured and fabricated for the specific opening. You can see what full installation includes here: Gate Installation in Oakland.
Electric Gate Repair in Oakland
Oakland’s fog and damp air are hard on electric gate components. Circuit boards corrode, limit switches fail, and wiring connections degrade faster near the bay than they do inland. We service openers from FAAC, BFT, Linear, and Viking, and we diagnose the full system, not just the board, so the repair holds through wet winters. Electric gate work follows the same rule as everything else: written price first, cleanup photo at the end. Read more here: Electric Gate Repair in Oakland.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Oakland
We are factory-trained on the gate equipment Oakland homeowners actually own, including FAAC, BFT, Linear, and Viking. We keep common replacement parts for these lines in our local stock, which means many repairs happen on the first visit. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Oakland, CA
| Service | Typical range in Oakland |
|---|---|
| Gate realignment (sagging or dragging) | $150 – $350 |
| Latch or hinge replacement | $120 – $300 |
| Post footing re-pour (cracked or shifted post) | $300 – $800 |
| Wood gate board replacement | $180 – $400 |
| Standard wood or iron gate installation | $1,200 – $4,500 |
| Custom iron gate installation | $3,500 – $8,000 |
| Electric opener motor replacement | $500 – $1,200 |
| Electric gate sensor or safety edge replacement | $200 – $500 |
| Electric gate circuit board repair | $250 – $650 |
| Full electric gate system installation | $2,500 – $7,500 |
Prices in Oakland trend higher when a post footing must be re-poured in clay soil or when rust has spread into the gate frame near the bay. Regardless of the number, you will see it in writing before any work begins, and you never pay more than what was agreed.
Neighborhoods We Serve in Oakland
We work throughout Oakland, from the hills to the flatlands, and we schedule around school drop-offs, nap times, and parking restrictions. Same-day repair visits are available across most of the city depending on the day’s schedule.
- Rockridge
- Temescal
- Montclair
- West Oakland
- Fruitvale
Service Area – Cities Near Oakland
Beyond Oakland itself, our crews regularly serve the nearby East Bay communities where gate styles and soil conditions are similar. If you are in Alameda, CA, San Leandro, CA, Berkeley, CA, or Castro Valley, CA, the same written-price promise and cleanup routine apply. Calls are answered live around the clock.
Serving Oakland, CA - Our Local Coverage Area
We’re based in the Oakland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Oakland
Repair calls in Oakland are typically scheduled same-day or next-day, depending on where you are in the city and the day’s route. Installation and full electric system work is scheduled in advance, since it involves measuring, ordering, and fabrication. Call (628) 227-2771 to check today’s availability in your neighborhood.
Most straightforward gate repairs and replacements do not require a permit, but if your gate is tied to a retaining wall or sits on a property with historic designation, extra steps may apply. We can tell you what is typical for your address and handle the parts of the job that fall within our scope. Exact requirements come from the City of Oakland, and we work with what they require.
Yes. Our technicians wear shoe covers inside your home and lay drop cloths where work happens near finished floors. Before they leave, they take a photo of the cleaned work area. That routine is part of the Cedarwell C.A.R.E. values and it is included on every visit, not an add-on.
If your gate is sagging, sticking, rusted, or not opening, call us at (628) 227-2771 for a free estimate. A live person answers, day or night, and you will get a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Oakland Customers Say
"Electric gate was acting up. He was calm and methodical, found the bad sensor, and tidied the whole area by the gate post when he finished. No grease left on the driveway."
- Ravi Menon"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco