Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Danville
Gate installation in Danville runs between $2,800 and $9,500 for most residential projects, with custom wrought iron driveway gates in communities like Blackhawk landing closer to the $7,000 – $12,000 range once you factor in HOA-required finishes, operators, and access systems. We’re Latch and Post Gate Repair San Francisco, part of the Cedarwell family, and we’ve been installing and repairing gates since 2009. Danville is one of our core service areas, and our crews know the difference between a standard perimeter gate off Camino Tassajara and an HOA-governed entry system inside Blackhawk. If you’re planning a new gate, call (628) 227-2771 and we’ll walk through your project before a single thing is ordered.
Why Latch and Post Gate Repair San Francisco Is Danville’s Preferred Gate Installation Company
Danville homeowners call us because we understand what this town actually requires. A gate on a Sycamore Valley Road estate with a stucco pillar entry is not the same job as a gate in a newer development near Dougherty Valley. Our Gate Installation team has worked inside Blackhawk, in Magee Ranch, along Greenbrook Drive, and in the unincorporated pockets of Contra Costa County where HOA rules don’t apply. That matters when the height, finish, or operator style has to clear an architectural committee before we order steel.
Every job starts with a written price. Before any work begins, you’ll see the exact number for materials, labor, the operator, and the access wiring. No estimate that turns into a surprise invoice. Our technicians arrive in uniform, background-checked, wearing shoe covers if they need to step inside, and they clean up before they leave, with a photo of the finished work area. That’s the Cedarwell Care Promise, and it’s included on every visit, not sold as an upgrade.
We also answer the phone. A live person picks up 24 hours a day, 7 days a week. When a gate fails on a Friday evening before a weekend of house showings, you don’t want a voicemail. You call (628) 227-2771 and talk to someone who can dispatch a Danville crew.
Styles & brands we work with
Electric Gate Installation in Danville
Electric Gate Installation in Danville typically runs $4,200 – $8,800 for a complete system with operator, safety edges, and access controls, depending on gate length, weight, and whether we’re running power to a location that doesn’t currently have it. Danville’s large-lot homes often have gate locations 40 to 80 feet from the nearest outlet, so trenching and conduit add to the scope. We quote that work in writing before we start.
Operators Matched to the Gate, Not the Other Way Around
We install operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The right choice depends on gate weight, cycle frequency, and whether the HOA requires battery backup. We stock common parts for Danville customers so we’re not waiting on a distributor for two weeks when a board fails.
Underground Loop Detectors and Safety Edges
Danville driveways are long. A properly installed loop detector buried in the driveway lets the gate open automatically as your car approaches, without you pressing a button. We install and tune loops to Danville’s clay-heavy soil, which can shift and affect detection sensitivity. Safety edges and photo eyes are standard on every electric gate we install, no exceptions.
Driveway Gate Installation in Danville
Driveway Gate Installation in Danville spans $3,500 – $9,500 for swing or slide gates, including posts, hinges, finish, and automation. Custom wrought iron work in Blackhawk or on large estate lots along Diablo Road tends to run toward the upper end because the HOA finish requirements and gate dimensions demand more material and more careful fabrication. We’ll give you the exact number before any work begins.
Custom Wrought Iron and Steel Fabrication
Many Danville homes built from the 1970s onward feature ornate ironwork that reflects Spanish-Mediterranean or traditional California ranch styling. We fabricate to match existing railings and light fixtures where possible, and when an HOA governs the property, we build to their finish and height specifications from day one, not as a revision after materials arrive.
Post and Footing Work in Danville Soil
Danville’s clay soil expands and contracts with seasonal moisture, and that movement shifts post footings over time. We set posts in concrete footings sized for the gate weight and local soil conditions. For slide gates, we pay particular attention to rack alignment and post depth, because a shifted post means a misaligned rack and a motor that grinds itself to failure sooner than it should.
Trusted Brands We Service in Danville
We work on Ghost Controls, DoorKing, and Mighty Mule systems regularly in Danville, along with LiftMaster, FAAC, BFT, Linear, Viking, and Elite. Because we focus exclusively on gates, our technicians are factory-trained on these brands, not guessing from a manual. We keep common DoorKing and Ghost Controls parts in local stock for Danville service calls, which means faster repair turnaround when a board, gear, or sensor fails. If you already own a gate and want to add automation, we’ll match the right operator to the existing hardware and the way your family actually uses the gate.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Danville Homes
- HOA rejection of gate style, height, or finish. This happens when a homeowner orders materials before architectural approval. A Blackhawk gate that doesn’t match the required dark bronze finish gets sent back, and the homeowner eats the restocking cost. We help you get the design approved before anything is fabricated.
- Water intrusion into gate operators. Danville’s wet winters plus poor drainage in certain neighborhoods means control boards short out when water finds its way into the operator housing. We seal and elevate operators, install drip loops, and use weather-rated enclosures.
- Misaligned rack and pinion on slide gates. Clay soil movement shifts post footings, which throws the rack out of alignment. The gate starts grinding, the motor works harder, and eventually burns out. Deeper footings and proper rack installation prevent most of this.
- No battery backup during PG&E shutoffs. When public safety power shutoffs hit Danville, a gate without battery backup locks in position or drains its operator. We install battery backup systems sized to the gate’s cycle count so you can get in and out during an outage.
Pricing for Gate Installation in Danville, CA
A standard single swing gate with operator in Danville runs $3,800 – $6,500. A double swing gate for a wider driveway runs $5,500 – $9,500. Slide gates on sloped Danville estates start around $4,500 and can exceed $10,000 with custom ironwork, HOA finishes, and access controls. Pedestrian gates with keypad entry run $1,200 – $2,800 including installation. The exact price depends on gate size, material, automation, power runs, and any HOA-required specifications. We give you a written price before any work starts, and that number doesn’t change unless you change the scope. Call (628) 227-2771 for a free estimate at your Danville home.
We Also Serve Cities Near Danville
While this page focuses on Gate Installation in Danville, our crews also serve Walnut Creek, Hayward, Castro Valley, and San Leandro. If you’re just outside Danville in an unincorporated Contra Costa County parcel, we can still help. Call and we’ll confirm your address and schedule a visit.
Serving Danville, CA - Our Local Coverage Area
We’re based in the Danville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Danville
Yes, in most Danville HOAs, including Blackhawk, you’ll need architectural committee approval before installing a new driveway gate, specifically for gate style, height, color, and finish. Blackhawk’s guidelines require compatible Spanish-Mediterranean styling, meaning dark bronze or iron finishes and heights that match neighboring properties. Approval typically takes 2 to 4 weeks. We can prepare the drawings and spec sheets your committee needs. Call (628) 227-2771 and we’ll help you get approved before you spend a dollar on materials.
A slide gate is almost always the better choice for a sloped Danville driveway, because swing gates need level ground to operate without dragging or stressing hinges. Slide gates run on a track and don’t care about the grade, as long as the posts are set deep enough for Danville’s clay soil. The trade-off is you need space along the fence line for the gate to slide. We’ll assess your driveway in person and give you a written recommendation, not a guess.
Yes, if you want the gate to work during a PG&E public safety power shutoff, you need a battery backup system sized to your gate’s cycle count. Danville has been hit by these shutoffs, and a gate without backup either locks in place or drains the operator trying to move on low voltage. We install battery backups on most Danville electric gates as standard practice. It’s a few hundred dollars well spent. Call (628) 227-2771 for exact pricing on your gate.
In most cases, adding a keypad to the gate does not require re-approval from the Blackhawk HOA, as long as you’re not changing the gate’s style, height, or finish. Keypads, loop detectors, and remote controls are considered access hardware, not architectural changes. That said, if your keypad is visible from the street, some committees want it finished to match the gate. We’ll install it cleanly and check with your HOA’s guidelines before drilling. Give us a call at (628) 227-2771 and we’ll sort it out.
We prevent water intrusion by sealing the operator housing, using weather-rated gaskets and enclosures, elevating the unit on a proper mounting plate, and installing drip loops on all low-voltage wiring so water runs off instead of following the wire into the board. In Danville neighborhoods with poor drainage, we also check the post base and the area around the operator for standing water. A small elevation change or a swale is often enough to keep the board dry through a wet winter.
If you’re ready to talk through a gate installation or replacement at your Danville home, call (628) 227-2771. We’ll answer the phone, ask about your property, your HOA requirements, and how you use the gate, and schedule a visit at a time that works for your family. The estimate is free, the price is in writing before any work begins, and the work is covered by the 365-Day Done Right Promise.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Francisco, serving Danville since 2009.