Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Burlingame
Gate installation in Burlingame runs $2,400 to $9,800 for most residential work, with driveway gates on the higher end and pedestrian gates closer to $1,800 to $4,200. We cover every Burlingame neighborhood, from the Easton Addition up into Burlingame Hills, and we’ll have a written price in your hand before any material gets ordered. Call (628) 227-2771 and a live person answers, day or night.
What makes our Gate Installation work different in Burlingame comes down to one thing: the fog. Most gate companies treat every job the same, whether it’s Mission Bay or Millbrae. We don’t. The salt-laden moisture that rolls off the Pacific each morning and settles over Burlingame’s tree-lined streets does specific, predictable damage to gate hardware, and we spec every installation around it from the first post hole.
Why Latch and Post Gate Repair San Francisco Is Burlingame’s Preferred Gate Installation Company
Burlingame homeowners call us because we understand what their properties demand. This isn’t a city of track homes and vinyl fencing. It’s early 20th-century Spanish Colonial Revival, Tudor, and Craftsmans on Easton Drive, Hillside Drive, and throughout the Easton Addition, where a gate has to look like it belongs to the house, not like it came off a shelf. Our crews are factory-trained on the equipment Burlingame families actually own – DoorKing, Elite, Ghost Controls, and Mighty Mule among them – and we stock the parts for those brands locally so we’re not waiting on a shipping window.
Cody Beckman has built our reputation around one practice: every installation gets a written price before work starts, shoe covers and drop cloths on every visit, and a photo of the cleaned-up site before the technician pulls away. The 365-Day Done Right Promise backs it all. If something isn’t right a month or ten months later, we make it right. No argument, no fine print.
Scheduling is coordinated from our San Francisco Bay Area office, and crews serve Burlingame locally, so a gate installation is measured and scheduled on your timeline, not a dispatch board’s.
Styles & brands we work with
Driveway Gate Installation in Burlingame
Driveway Gate Installation in Burlingame typically runs $3,800 to $9,800, and almost every job we quote in neighborhoods like Burlingame Hills or the Easton Addition starts with one question: will this gate survive the fog belt? Existing custom wrought iron and solid wood driveway gates on estate-style properties are worth preserving where they can be, but when the hinge posts have rusted at the concrete line, reinforcement becomes a structural question, not a cosmetic one. A Burlingame driveway gate needs to do two jobs – secure the property from Broadway-adjacent traffic and withstand damp, salty air for decades without sagging.
Most standard driveway gate installations take one to two days on site, plus the time to order and prefabricate panels. We measure, quote a fixed written price, order, fabricate, install, and then walk the property with you before we leave.
Custom Estate Gates in the Easton Addition
Homes in the Easton Addition and Burlingame Hills often sit on long driveways with gates set well back from the street. That distance means these gates take the full brunt of the fog each morning, and the original hardware, many of these gates date back to the 1920s and 1930s, wasn’t spec’d for it. We regularly rebuild hinge post footings, sleeve posts in galvanized steel, and rehang original solid wood panels so the gate stays true to the home’s architecture instead of getting swapped for something generic.
Security-First Driveway Gates
New automatic driveway gates in Burlingame need more than an operator bolted to concrete. We install safety photocells, proper entrapment protection, and keypad or intercom entry systems. If you want the gate to close behind delivery drivers and keep wandering eyes off the driveway, we’ll set closing logic and safety reversal so it behaves correctly every cycle – not just on install day.
Prices for a new automatic driveway gate in Burlingame usually land between $5,200 and $9,800, depending on gate length, operator type, and whether we’re replacing old posts or setting new ones. You’ll see the exact number in writing before we touch anything.
Sliding Gate Installation in Burlingame
Sliding Gate Installation in Burlingame typically costs $3,200 to $7,600, and it’s the right choice for a lot of the city’s hillside driveways where a swing gate would fight gravity. The coastal humidity and morning fog mean the rack and pinion, the gear track that carries the gate, needs stainless or galvanized hardware from day one. Skip that and the first winter storm season will leave you with a gate that grinds to a stop halfway open, usually at 7 a.m. when you’re trying to leave for Caltrain.
We measure the driveway slope, set the concrete track or cantilever supports, and install the operator with a sealed enclosure so the control board doesn’t corrode at the power terminals. A Burlingame sliding gate has to handle fog, damp air, and the occasional hill-slope water runoff without binding or shorting.
Hillside Sliding Gates in Burlingame Hills
Driveways in Burlingame Hills often climb at angles that make swing gates impractical. A sliding gate rides on a track or cantilever system, so the slope matters less than it would with a swinging panel. We set the rail to handle water runoff and grade the support points so the gate doesn’t collect moisture at the lowest corner. That detail is the difference between a gate that runs smooth for 15 years and one that needs a service call every November.
Replacing a Manual Gate with an Automatic Sliding System
Some Burlingame homes still have manual sliding gates that predate automation. We can add a DoorKing or Elite sliding operator to an existing gate if the rail and rollers are sound, but often the hardware from 30 years ago is too worn to carry the new operator. In that case, we’ll quote the full installation with new track, new rollers, and sealed electronics, then install it in a day or two once fabrication is done.
Expect $4,800 to $7,600 for a complete automatic sliding gate on a standard Burlingame driveway, with the final number quoted and agreed before work begins.
Trusted Brands We Service in Burlingame
We’re factory-trained on the gate systems Burlingame homeowners actually have, including DoorKing, Elite, Ghost Controls, and Mighty Mule. That means when your Elite slide operator’s board fails after a wet winter, we carry the replacement parts instead of telling you to wait two weeks for a distributor. Our local parts stock covers the motors, boards, remote transmitters, and safety edges most often needed in this area. If you call about a Ghost Controls swing arm that’s stopped responding, we can usually have it diagnosed and fixed on the first visit rather than scheduling a second trip.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Burlingame Homes
- Rusted-out hinge post footings. Fog-belt condensation wicks into the bottom of hollow steel posts and rusts them from the inside out at the concrete line within five to seven years. By the time the gate starts sagging, the post is often structurally compromised below grade.
- Seized cast-iron hinges on custom estate gates. Salt air pits the bearing surfaces of untreated cast-iron hinges, and the gate starts to drag on the driveway. We see this constantly on original Spanish Colonial gates in the Easton Addition.
- Corroded operator control boards. When a gate opener is installed without a sealed enclosure, the damp winter air attacks the power terminals and the board fails intermittently. This is the most preventable problem we encounter, and it’s why we always spec sealed electrical boxes on Burlingame installations.
- Warped wooden gate panels. Repeated fog exposure and winter storms swell and twist older wood panels, especially solid redwood and douglas fir gates. On a long driveway in the Easton Addition, our crew pulled a warped solid-wood driveway gate whose hinge post had rotted at the footing from ten years of fog-drip, then re-hung the gate with stainless hinges and a new galvanized post sleeve.
Pricing for Gate Installation in Burlingame, CA
A pedestrian gate in Burlingame runs $1,800 to $4,200. A new driveway gate, depending on whether it’s a swing or sliding system and what operator you choose, lands between $3,200 and $9,800. The main cost drivers here are material spec, because galvanized and stainless hardware costs more than bare steel, and site access, because long Easton Addition driveways and hillside properties take more time to set up.
We don’t quote over the phone and then change the number. We measure, we write a fixed price, and you see it before any work starts. If the scope changes because we find something unexpected under the surface, the new number gets agreed in writing before we proceed. That’s the Cedarwell Care Promise, and it’s how we’ve done every Burlingame job since 2009. Call (628) 227-2771 for a free estimate.
We Also Serve Cities Near Burlingame
Our Gate Installation in Burlingame crew also covers San Mateo, San Bruno, South San Francisco, and Pacifica. The fog belt doesn’t stop at the city line, and neither do we. If you’re a few blocks over the border, call and we’ll send a technician who knows exactly what your neighborhood’s gates are up against.
Serving Burlingame, CA - Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Burlingame
Burlingame’s Easton Addition and Burlingame Hills sit in a persistent fog belt that San Mateo’s flatter, more inland neighborhoods escape. The salt-laden moisture settles into hinge bearings, post footings, and any unpainted ferrous metal, accelerating corrosion noticeably within a few years. The fix is spec, not more paint: stainless hinges and galvanized post sleeves from the start, which is standard on every Burlingame installation we do. Call (628) 227-2771 and we’ll tell you exactly what your current hardware needs.
Galvanized steel, always, with stainless fasteners. Painted steel looks fine on day one, but the fog-belt moisture gets into the uncoated edges and seams and works outward, so the paint starts blistering within three to five years. Galvanized steel with a powder-coat finish is the specification that survives Burlingame’s climate, and it’s what we quote for every new driveway gate installation.
Every 12 to 18 months, more often if the gate faces west and takes the full morning fog cycle. The pinion gear and rack collect salt spray and grit, and if the lubrication washes out, the metal-on-metal wear accelerates fast. A service visit is a fraction of the cost of a new rack, and it’s the single best thing you can do to extend the life of a sliding gate in this climate.
We don’t recommend it. Burlingame’s persistent morning fog, especially in the Easton Addition and Burlingame Hills, cuts solar output hard, and the panel can’t recharge the battery reliably enough for daily use. A hardwired operator with a sealed enclosure is what we spec for Burlingame, where the damp air is already working against the electronics. We’ll run the power properly so the gate works every time, not just on sunny afternoons.
Every new automatic gate in Burlingame must have entrapment protection, which means a minimum of monitored safety photocells across the gate opening and a reversing mechanism that detects obstruction and reverses direction. We install UL 325-compliant systems as standard, with the photocells placed low enough to catch a child or pet. If you’re replacing an older operator that predates current safety standards, we’ll bring the whole system up to code before we commission it.
Written by Cody Beckman, Owner at Latch and Post Gate Repair San Francisco, serving Burlingame since 2009.