Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across San Pablo
When an electric gate stops working in San Pablo, it’s rarely a simple fix. Most homes and apartment buildings here still run gate systems installed between the 1950s and 1970s, which means the problem is usually an obsolete control board, a corroded hinge post, or an operator that predates modern safety standards. Our Electric Gate Repair team works on these legacy systems every week, and we arrive ready to retrofit rather than just replace. Call (628) 227-2771 and you’ll speak with a live person who can schedule a San Pablo visit. Every job comes with a written price before we touch anything.
Why Latch and Post Gate Repair San Francisco Is San Pablo’s Preferred Electric Gate Repair Company
San Pablo has a specific kind of gate problem: older equipment, damp bay air, and steep driveways. We’ve spent years learning exactly how those three things interact. A control board that fails in El Sobrante often fails the same way a few miles west off San Pablo Avenue, and we carry the boards and retrofit kits that match what’s actually installed here, not just what’s current. Customers off Rumrill Boulevard and in the neighborhoods around Contra Costa College call us because we diagnose the old stuff the first time. We don’t suggest replacing a 1960s swing gate operator when a $140 control board swap does the job. Cody Beckman, who leads our team, has built the whole operation around that honesty. San Pablo homeowners routinely tell us the written price and the clean floor are what sealed it for them. Shoe covers go on before we step inside, drop cloths go under the gate track, and you get a photo of the cleanup before the tech pulls away. That’s the Cedarwell C.A.R.E. routine every visit, no exceptions.
Styles & brands we work with
Gate Opener Repair in San Pablo
Gate Opener Repair in San Pablo usually means one of three things: the motor capacitor burned out, the control board shorted from moisture, or the limit switches drifted out of adjustment. In older San Pablo systems, the control board in its corroded steel enclosure near the bay is the most common culprit. Most opener repairs run between $160 and $340, including the diagnostic and the part, and you’ll see the exact number written down before we start. If the motor itself is seized, that’s a different conversation, but we always check the least expensive fix first.
Control Board and Capacitor Work
Legacy LiftMaster, FAAC, and BFT boards are still available, and we stock the most common replacements for San Pablo’s housing stock. A capacitor swap takes under an hour. A board retrofit with updated safety logic runs higher, usually $260 to $420, and we’ll explain whether your old remote and keypad will still work before you commit to anything.
Limit Switch Adjustment
On hillside driveways off San Pablo Dam Road, gates that stop short or overtravel are nearly always a limit switch or magnetic sensor problem. Our techs set the travel so the gate closes fully without straining against an uphill slope. That adjustment plus a hinge inspection starts around $120.
Automatic Gate Repair in San Pablo
Automatic Gate Repair in San Pablo covers everything from a pedestrian gate that won’t latch to a full apartment-complex slide gate that shears rack teeth. The heaviest use in San Pablo is on multi-family buildings along 23rd Street and near Rumrill, where sliding gates cycle dozens of times a day. Those repairs typically range from $180 for a sensor realignment to $600 for a rack-and-pinion repair with a new motor drive. We carry FAAC and Viking slide gate parts locally, so turnaround on an apartment gate is usually measured in days, not weeks.
Apartment and Complex Slide Gates
Slide gates in San Pablo apartment buildings fail from accumulated grit in the track, worn rollers, and operators without proper entrapment protection that keep getting pushed past their duty cycle. We check the full mechanical path before blaming the motor. A track roller replacement with a sensor adjustment commonly runs $220 to $380 on these buildings.
Swing Gate Hinge and Post Repair
Older swing gates in San Pablo drag because the hinge post rotted or rusted at the base, particularly in the damp air that sits over this part of the Bay. We weld or bolt in offset hinge plates and, where needed, pour a new post footing so the gate clears the driveway. Expect $200 to $450 for most hinge and post corrections, more when the old post needs complete replacement.
Trusted Brands We Service in San Pablo
We’re factory-trained on the brands San Pablo actually has installed: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters here because the older FAAC and BFT hydraulic operators from the 1980s and 1990s need different parts and different diagnostics than a new Mighty Mule from the hardware store. We keep common control boards, remotes, and safety sensors on our trucks for San Pablo jobs, which means most repairs finish in one visit. When a part is rare, we source it from the manufacturer’s California supplier network, usually within two or three days.
Common Electric Gate Repair Problems We See in San Pablo Homes
- Moisture-shorted control boards. San Pablo’s fog and bay air seep into older enclosures, especially on gates installed in the 1960s and 1970s. We replace the board and seal the enclosure properly, or retrofit a new weatherproof box if the original is rusted through. If you’re curious whether your board is salvageable, call us for a free diagnostic.
- Dragging swing gates on hillside driveways. Many San Pablo homes sit on slopes where the gate post has shifted or corroded at the base. The gate isn’t bent; the post has moved. A custom offset hinge plate usually fixes the geometry problem without replacing the gate.
- Slide gates shearing rack teeth. On apartment complexes with heavy daily cycling, worn rollers and misaligned tracks force the rack and pinion out of alignment. Replacing the rack twice a year means something underneath is wrong. We find and fix that first.
- Foggy-morning safety sensor faults. Condensation in the photo eye or reflective sensor is common near the bay, especially on older operators without heated lenses. We clean, re-aim, and when needed, swap in sealed sensor housings. If your gate reverses for no reason in the morning but works by noon, call us.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in San Pablo, CA
What you’ll actually pay in San Pablo depends on the equipment and the age of what’s installed, but here are honest ranges: a control board replacement runs $180 to $340, a limit switch or sensor repair runs $120 to $200, a swing gate hinge or post correction runs $200 to $450, and a slide gate mecanismo repair on an apartment complex runs $220 to $600. You’ll receive a written price before any work begins, every visit, no exceptions. We never start a job on an estimate alone. The process is calm, specific, and settled before a single tool comes off the truck. Schedule a diagnostic and we’ll give you the exact number, in writing, with no pressure to proceed.
We Also Serve Cities Near San Pablo
We work all around the East Bay and North Bay. If your gate is in San Pablo, Richmond, Berkeley, San Rafael, or Martinez, the same crew and the same written-price commitment apply. Many San Pablo customers find us through neighbors in Richmond or Berkeley, and we’re glad to run across town when a gate stops working.
Serving San Pablo, CA - Our Local Coverage Area
We’re based in the San Pablo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Pablo
Yes, in most cases we can retrofit. A 1960s swing gate can be brought up to current safety standards by adding a modern safety edge, a compliant control board, and photoelectric sensors, without replacing the entire operator. The cost runs $300 to $550 depending on what’s already there, and we’ll quote it in writing before we start. Call (628) 227-2771 for a free diagnostic of your specific gate.
Morning fog condenses on the reflective photo eye or inside the sensor housing, which the old control board reads as an obstruction. The sensor itself is usually fine; the fix is cleaning, re-aiming, and often replacing the housing with a sealed or heated one. A sensor service visit in San Pablo typically runs $120 to $180. Call us and we’ll test it on a foggy morning, not a dry afternoon.
The repeated rack failure almost always means the gate rollers are worn or the track is out of level, so the gate’s weight drags unevenly across the pinion. Replacing the rack alone never solves it. We inspect the rollers, the guide trucks, and the track bed, then repair the alignment before installing new rack sections. Total repair on a San Pablo apartment slide gate usually runs $500 to $900 with the realignment, and it should not fail again the same way.
No, it’s usually not bent. On San Pablo hillside lots, the hinge post shifts or rusts at the base, tilting the entire gate leaf slightly so it scrapes the concrete near the latch. It looks fine because the metal is straight; what changed is the post below ground. We fix it with an offset hinge plate or a new post footing, typically $200 to $400. Call (628) 227-2771 and we’ll tell you which one you need.
It depends on the board and the gear assembly. If the original circuit board has failed and the motor still runs strong, a control board retrofit runs $260 to $400 and gives you modern safety features without a full replacement. If the gearbox is scored or the motor windings are burned, replacement is usually cheaper than rebuilding, and a new operator with entrapment protection starts around $900 installed. We’ll show you both options, in writing, and you decide. Call us for a free inspection of your DoorKing operator.
Call Latch and Post Gate Repair San Francisco for San Pablo Electric Gate Repair
If your electric gate is dragging, shorting, or stopping halfway in San Pablo, call (628) 227-2771 now. You’ll get a live person, a straight answer, and a free written estimate before any work starts. We serve the whole city, including the El Portal neighborhoods, the hills above San Pablo Dam Road, and the apartment corridors near Rumrill and 23rd. Cody Beckman and our team are ready to fix it cleanly and correctly, with the 365-Day Done Right Promise behind every job.
Written by Cody Beckman, Owner at Latch and Post Gate Repair, serving San Pablo since the company’s founding in 2009.